V . Y O U R V I C T O R Y X L - 4
Your scooter is an indoor/outdoor, motorized electric scooter designed to enhance your personal mobility. For easy transportation or storage, you can disassemble your scooter into seven components. See figure 5.
SEAT
FRONT SECTION
REAR SECTION
REAR SHROUD | FRONT BASKET |
|
Figure 5. Victory XL-4 Components
BATTERIES
CONTROL CONSOLE ASSEMBLY
The control console assembly located on the front section houses all of the controls you need to operate your scooter. See figure 6.
WARNING! Do not expose the control console assembly to moisture. In the event it does become exposed to moisture, do not attempt to operate your scooter until it has dried thoroughly.
BATTERY CONDITION METER
LOWER FRONT HEADLIGHT SWITCH HORN BUTTON
THROTTLE
CONTROL LEVER (REVERSE)
LEFT TURN SIGNALS BUTTON
RUNNING LIGHTS SWITCH
Figure 6. Control Console Assembly
SPEED ADJUSTMENT DIAL
ON/OFF STATUS LED
KEY SWITCH
HORN BUTTON THROTTLE CONTROL LEVER (FORWARD)
RIGHT TURN SIGNALS BUTTON
HAZARD LIGHTS SWITCH
Battery Condition Meter
When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the approxi- mate battery voltage strength. For further information on battery charging, see VI. “Batteries and Charging.”
Victory | www.pridemobility.com | 19 |