V . Y O U R S C O O T E R
TILLER CONSOLE
The tiller console houses all controls needed to drive your scooter, including the speed adjustment dial, key switch, throttle control lever, battery condition meter, status LED, and horn button. See figure5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console does become exposed to moisture, do not attempt to operate your scooter until the tiller console has dried thoroughly.
BATTERY CONDITION METER |
|
HORN BUTTON | KEY |
| (INSERTED INTO KEY SWITCH) |
STATUS LED | SPEED ADJUSTMENT DIAL |
| |
THROTTLE CONTROL LEVER | THROTTLE CONTROL LEVER |
(REVERSE) | (FORWARD) |
Figure 5. Tiller Console
Key Switch
νFully insert the key into the key switch to power up (turn on) your scooter.
νRemove the key from the key switch to power down (turn off) your scooter.
WARNING! If the key is moved to the “off” position while your scooter is in motion, the electronic brakes will engage and your scooter will come to an abrupt stop!
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum speed you preset with the speed adjustment dial.
νPlace your right hand on the right handgrip and your left hand on the left handgrip.
νUse your right thumb to push the right side of the lever to disengage your scooter’s brakes and move forward.
νRelease the lever and allow your scooter to come to a complete stop before pushing the other side of the lever to move in reverse.
νWhen the throttle control lever is completely released, it automatically returns to the center “stop” position and engages your scooter’s brakes.
Horn Button
The key must be fully inserted into the key switch for the horn to be operational.
νThis button activates a warning horn.
νDo not hesitate to use the warning horn when doing so may prevent accident or injury.
Status LED
The statusLEDwillalertyoutoelectricalproblemsthatmayoccurwiththescooter. The LED remains constantly lit while your scooter is on. If the scooter develops an electrical problem, the status LED will flash a code. See X. “BasicTrouble-
shooting” for flash codes. If the status LED flashes a code other than a code listed, contact your authorized Pride Provider.
20 | www.pridemobility.com | Sonic/RevA/May 2004 |