Sonic Blue Scooter owner manual I I . C O M F O R T a D J U S T M E N T S, Tiller Angle Adjustment

V I I I . C O M F O R T A D J U S T M E N T S

TILLER ANGLE ADJUSTMENT

WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the scooter is in motion.

Your scooter is equipped with an adjustable pivoting tiller.
1.	Turn the tiller adjustment knob counterclockwise to loosen
	the tiller. See figure 13.
2.	Move the tiller to a comfortable position.	TILLER
3.	Turn the tiller adjustment knob clockwise to secure the tiller
		ADJUSTMENT
	in position.	KNOB

NOTE: In order to lower the tiller to the scooter deck, you must first remove the seat. Remove the seat by pulling it straight up and off of the scooter.

SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of two different
heights. See figure 14.
1. Remove the seat from your scooter.	Figure 13. Tiller Adjustment

2.	Use the attached ring to pull and remove the de-
	tent pin from the lower seat post.
3.	Raise or lower the upper seat post to the desired
	seat height.		UPPER SEAT
4.	While holding the upper seat post at that height,
		ADJUSTMENT HOLES	POST
	match up the adjustment holes in the upper and
	lower seat post.	DETENT PIN
5.	Fully insert the detent pin.
6.	Replace the seat.
		LOWER
SEAT ROTATION		SEATPOST
The seat can be rotated to one of four positions in
90° increments.
1.	Pull up slightly on the seat.
2.	Rotate the seat 90° or 180° to the right or left to
	the desired position.
3.	Lower the seat and be sure it is locked into
	position.
		Figure 14. Seat Height Adjustment

Sonic/RevA/May 2004 www.pridemobility.com 29