Shoprider TE-889XLSN Adjustments, Tiller Angle Adjustment Fig, Folding the Tiller, Seat Removal

Page 7

ADJUSTMENTS

Tiller Angle Adjustment (Fig 2)

On the left hand side at the base of the tiller is a red lever. Push the lever to release the pin and select the desired tiller angle. Refit the pin into one of the three location holes to lock tiller in place.

Tiller Angle

Adjustment

Knob

Figure 2

Folding the Tiller

Fold down the tiller by pushing the lever to release the pin (fig 2).

Seat Removal

Turn the seat hand knob under the base of the seat counterclockwise to loosen. Lift the seat off the seat post.

Seat Slide Adjustment

Lift red lever located under seat & slide seat to desired position. Release lever & seat will lock into position.

7/3/2006

- 7 -

Image 7
Contents Flagship Table of Contents Introduction Flagship Features Figure Safety Advice Scooter Electromagnetic Interference EMI EMI Warning2006 Folding the Tiller AdjustmentsTiller Angle Adjustment Fig Seat Slide AdjustmentScooter Tiller Controls FIG DRIVE/FREEWHEEL Operation FIG Starting to Drive Your Scooter Ramps Extra Guidelines in the Control of Your ScooterGrass and Gravel Battery Charger Fig Batteries and Battery ChargingCharging Troubleshooting Guide MaintenanceUnit Specifications Technical SpecificationsQuarterly Inspection Warranty