3 Touchcor dnext to PHASE to select
thephase of subwoofer output.
Touchdto select normal phase and
NORMALappears in the display. Touch cto
selectreverse phase and REVERSE appears in
thedisplay.
4 Touchcor dnext to LEVEL to adjust
theoutput level of the subwoofer.
+6to 24 is displayed as the level is increased
ordecreased.
5 Touchcor dnext to FREQUENCY to se-
lectcut-off frequency.
Eachtime you touch cor dselects cut-off fre-
quenciesin the following order:
50Hz63Hz80Hz100Hz125Hz
Onlyfrequencies lower than those in the se-
lectedrange are outputted from the subwoo-
fer.
Boosting the bass
Bassboost function boosts the bass level of
sound.
1 TouchBASS BOOSTER on the audio
functionmenu.
2 Touchcor dto select a desired level.
0to+6 is displayed as the level is increased or
decreased.
Using the high pass filter
Whenyou do not want low sounds from the
subwooferoutput frequency range to play
fromthe front or rear speakers, turn on the
HPF(high pass filter). Only frequencies higher
thanthose in the selected range are output
fromthe front or rear speakers.
1 TouchHPF on the audio function menu.
2 Touchdnext to HPF to turn high pass
filteron.
#Toturn high pass filter off, touch c.
3 Touchcor dnext to FREQUENCY to se-
lectcut-off frequency.
Eachtime you touch cor dselects cut-off fre-
quenciesin the following order:
50Hz63Hz80Hz100Hz125Hz
Onlyfrequencies higher than those in the se-
lectedrange are output from the front or rear
speakers.
Adjusting source levels
SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM volume level,
whichremains unchanged.
1 Comparethe FM volume level with the
levelof the source you wish to adjust.
2 TouchNEXT on the audio function
menu.
3 TouchSLA.
4 Touchcor dto adjust the source vo-
lume.
Eachtime you touch cor dit increases or de-
creasesthe source volume.
+4to 4is displayed as the source volume is
increasedor decreased.
Notes
!TheAM volume level can also be adjusted
withsource level adjustments.
!VideoCD, CD, compressed audio and DivX
areset to the same source level adjustment
volumeautomatically.
!Externalunit 1 and external unit 2 are set to
thesame source level adjustment volume
automatically.
<CRB2972-A/N>37
Operating this unit
En 37
Section
03
Operatingthis unit