FLAT Flat
SUPERBASS Superbass
!CUSTOMis an adjusted equalizer curve
thatyou create. If you make adjustments to
anequalizer curve, the equalizer cur ve set-
tingis memorized in CUSTOM.
!WhenFLAT is selected, no supplement or
correctionis made to the sound. This is
usefulto check the effect of the equalizer
curvesby switching alternatively between
FLATand a set equalizer curve.
%PressEQ to select the equalizer.
PressEQ repeatedly to switch between the fol-
lowingequalizers:
POWERFULNATURALVOCALCUSTOM
FLATSUPERBASS

Adjustingequalizer curves

Youcan adjust the center frequency and the Q
factor(curve characteristics) of each currently
selectedcurve band (LOW/MID/HIGH).
!Theactual range of the adjustments are dif-
ferentdepending on which equalizer cur ve
isselected.
Level (dB)
Center frequency
Q=2N Q=2W
Frequency (Hz)
1 TouchPARAMETRICEQ on the audio
functionmenu.
2 Touchcor dnext to EQ SELECT to se-
lectan equalizer curve.
POWERFULNATURALVOCALCUSTOM
FLATSUPERBASS
3 Touchcor dnext to BAND to select
theequalizer band to adjust.
LOW(low)MID (mid)HIGH (high)
4 Touchcor dnext to FREQUENCY to se-
lectthe frequency to adjust.
Low:40Hz80Hz100Hz160Hz
Mid:200Hz500Hz1kHz2kHz
High:3.15kHz8kHz10kHz12.5kHz
5 Touchcor dnext to Q.FACTOR to se-
lectthe Q factor.
2W1W1N2N
6 Touchaor bto adjust the level of the
equalizerband.
+12dBto -12dB is displayed as the level is in-
creasedor decreased.
#Youcan then select another band and adjust
thelevel.
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 TouchLOUDNESS on the audio function
menu.
2 Touchdto turn loudness on.
#Toturn loudness off, touch c.
3 Touchcor dto select a desired level.
LOW(low)MID (mid)HIGH (high)
Using subwoofer output
Thisunit is equipped with a subwoofer output
whichcan be turned on or off.
!Whenthe subwoofer output is on, you can
adjustthe cut-off frequency and the output
levelof the subwoofer.
1 TouchSUB WOOFER on the audio func-
tionmenu.
2 Touchdnext to SUB WOOFER to turn
subwooferoutput on.
#Toturn subwoofer output off, touch c.
<CRB2972-A/N>36
Operating this unit
En
36
Section
03