!EXT-VIDEO–External video unit (such as
Pioneerproducts available in the future)
!TV–TV tuner connected with RCA cable
Setting the clock
Usethese instructions to set the clock.
1 TouchCLOCK ADJ on the system menu.
2 TouchON/OFF to turn the clock display
on.
#Toturn the clock display off, touch ON/OFF
again.
3 Touchcor dto select the segment of
theclock display you wish to set.
Eachtime you touch cor dit will select one
segmentof the clock display:
Hour—Minute
Asyou select segments of the clock display
thesegment selected will be highlighted.
4 Touchaor bto put a clock right.
Notes
!Youcan match the clock to a time signal by
touchingJUST.
—If00 to 29, the minutes are rounded down.
(e.g.,10:18 becomes 10:00.)
—If30 to 59, the minutes are rounded up.
(e.g.,10:36 becomes 11:00.)
!Evenwhen the sources are off, the clock dis-
playappears on the display.
Setting for rear view camera(back up camera)
CAUTION
Pioneerrecommends the use of a camera
whichoutputs mirror reversed images, other-
wisescreen image may appear reversed.
Thisunit features a function that automatically
switchesto the rear view camera video (REAR
CAMERAIN jack) when a rear view camera is
installedon your vehicle. When the gearshift
isin REVERSE (R) position, the video auto -
maticallyswitches to a rear view camera
video.(For more details, consult your dealer.)
!Afteryou set upthe rear view camera set-
ting,move the gear shift in REVERSE (R)
andconfirm if a rear view camera video
canbe shown on the display.
!Ifthe display should be switched to a rear
viewcamera video by error while you are
drivingforward, change the rear viewcam-
erasetting.
!Toend watching a rear view camera video
andreturn to the source display, press and
holdVOLUME/MUTE.
!Evenwhile driving, rear view camera image
canbe displayed. To do this, touch
REARVIEWsource icon. In this case, touch
REARVIEWagain to turn off the rear view
camera.For details, refer to Selecting a
sourceon page 17.
%TouchCAMERA POLARITY on the sys-
temmenu to select an appropriate setting.
!BATTERY–When the polarity of the con-
nectedlead is positive while the gear shift
isin REVERSE (R) position
!GROUND–When the polarity of the con-
nectedlead is negative while the gear shift
isin REVERSE (R) position
!OFF–When a rear view camera is not con-
nectedto this unit
Adjusting the LCD panel slideposition
Youcan adjust the LCD panel slide position so
thatthe panel is set back or for ward.
1 TouchNEXT on the system menu.
2 TouchFLAP SET BACK to turn the set
backon.
TheLCD panel slides to the back.
#TouchFLAP SET BACK again to turn the set
backoff and the LCD panel slides to the front.
<CRB2972-A/N>47
Operating this unit
En 47
Section
03
Operatingthis unit