!Itis possible to connect a portable audio/
videoplayer by using a 3.5 mm plug (4
pole)to RCA cable, which is sold sepa-
rately.However, depending on the cable, re-
verseconnection between red (right side
audio)cable and yellow (video) cable is re-
quired.Otherwise, audio and video may not
becorrectly reproduced.
%Insertthe mini plug into the AUX input
jackon this unit.
Formore details, refer to What’s what on page
16.

IP-BUS-RCAinterconnector (AUX 2)

Whenconnecting auxiliar y device using an IP-
BUS-RCAInterconnector (sold separately)
%Usean IP-BUS-RCA Interconnector such
asthe CD-RB20/CD-RB10 (sold separately)
toconnect this unit to auxiliary device fea-
turingRCA output.
Formore details, refer to the IP-BUS-RCA Inter-
connectorowner ’s manual.
#Youcan only make this type of connection if
theauxiliary device has RCA outputs.

SelectingAUX as the source

%Touchthe source icon and then touch
AUX1/AUX 2 to select AUX as the source.
#Ifthe auxiliary setting is not turned on, AUX
cannotbe selected. For more details, refer to
Switchingthe auxiliary setting on page 42.

Settingthe AUX title

Thetitle displayed for the AUX source can be
changed.
!Eachtitle can be up to 10 characters long.
1 Afteryou have selected AUX as the
source,touch AV MENU and
FUNCTIONMENU and then touch
NAMEEDIT.
#Whenthe touch panel keys are not displayed,
youcan display them by touching the screen.
2 TouchABC to select the desired charac-
tertype.
TouchABC repeatedly to switch between the
followingcharacter types:
Alphabet(upper case)—Alphabet (lower case)
—Europeanletters, such as those with ac-
cents(e.g., á,à,ä,ç)
#Youcan select to input numbers and symbols
bytouching 123.
3 Touchaor bto select a letter of the al-
phabet.
4 Touchdto move the cursor to the next
characterposition.
5 TouchOK to store the entered title in
memory.
6 TouchESC to return to the ordinary dis-
play.
Using the external unit
Externalunit refers to a Pioneer product (such
asones available in the future) that, although
incompatibleas a source, enables control of
basicfunctions with this unit. Two external
unitscan be controlled with this unit. When
twoexternal units are connected, the external
unitis automatically allocated to external unit
1or external unit 2 by this unit.
Basicoperations of the external unit are ex-
plainedbelow. Allocated functions are differ-
entdepending on the connected external unit.
Fordetails concerning functions, refer to exter-
nalunit’s owner ’s manual.

Selectingthe external unit as the source

%Touchthe source icon and then touch
EXT1/EXT 2 to select external unit as the
source.
<CRB2972-A/N>50
Operating this unit
En
50
Section
03