V I I I . C O M F O R T A D J U S T M E N T S
WARNING! Remove the key from the key switch before adjusting the tiller or the seat. Never attempt to adjust the tiller or the seat while the PMV is in motion.
TILLER ANGLE ADJUSTMENT
You can adjust the tiller angle to four different locking positions.
1.Pull up on the tiller adjustment lever. See figure 10.
2.Move the tiller to a comfortable position.
3.Release the tiller adjustment lever. The tiller will remain in that position.
NOTE: In order to lower the tiller to its lowest position, you must first remove the seat and both batteries.
SEAT HEIGHT ADJUSTMENT
Your Wrangler’s seat can be repositioned to one of three different heights.
1.Remove the seat from your Wrangler. See figure 11.
2.Use the attached ring to pull and remove the ball detent pin from the lower seat post. See figure 12.
3.Raise or lower the upper seat post to the desired seat height.
4.While holding the upper seat post at that height, match up the holes in the upper seat post and the lower seat post.
5.Fully insert the ball detent pin.
6.Replace the seat.
UPPER SEAT
POST
LOWER SEAT
POST
FIGURE 10. TILLER ADJUSTMENT LEVER
LOCATING HOLES
BALL DETENT
PIN
FIGURE 11. SEAT REMOVAL | FIGURE 12. SEAT HEIGHT ADJUSTMENT |
24 | Wrangler |