Pride Mobility Jet10Ultra Horn Key, Locking/Unlocking the VSI, To lock the VSI, To unlock the VSI

Page 33

V I I I . O P E R A T I O N

Horn Key

The horn key activates the horn.

Locking/Unlocking the VSI

The VSI has a feature that enables you to lock your power chair to prevent unauthorized use.

To lock the VSI:

1.With the VSI powered on, press and hold the on/off key. After 1 second, the VSI should beep.

2.Release the on/off key.

3.Push the joystick to the full forward position until the VSI beeps.

4.Pull the joystick to the full rearward position until the VSI beeps.

5.Release the joystick. There should be a long beep.

6.The VSI is now locked.

To unlock the VSI:

1.Press the on/off key to power on the VSI. The maximum speed indicator should ripple side to side.

2.Push the joystick to the full forward position until the VSI beeps.

3.Pull the joystick to the full rearward position until the VSI beeps.

4.Release the joystick. There should be a long beep.

5.The VSI is now unlocked.

NOTE: If the above procedure fails to either lock or unlock the VSI, contact your authorized Pride Provider.

Off-board Charger Socket

You may use an off-board charger to charge the power chair batteries through the 3-pin socket located on the front of the VSI. If you use an off-board charger, the charger current should not exceed 12 amps. Contact your authorized Pride Provider for more information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger socket. See your authorized Pride Provider for more information.

Motor Connectors

This connects the VSI to the power chair’s motors and motor brakes.

Charger Inhibit Connector

This connects the VSI to the onboard battery charger. This connection provides an inhibit that disables the VSI when the battery charger is on. The charger inhibit connector is coded with colored dots. The dots are positioned so that you align the flat side of the male connector with the flat side of the female connector before making the connection.

WARNING! Failure to properly align the connectors can result in damage to the VSI, the charger, and the connectors.

Jet 10 Ultra/RevA/Apr04

www.pridemobility.com

33

Image 33

Contents Pride F E T Y G U I D E L I N E S N T E N T S N T R O D U C T I O N PURCHASER’S AgreementInformation Exchange Pride Owners Club S a F E T Y Product Safety SymbolsS a F E T Y Modifications Pre-Ride Safety CheckWeight Limitations Tire InflationIncline Information Cornering Information Braking InformationFreewheel Mode Outdoor Driving SurfacesStationary Obstacles Steps, Curbs, etc EMI & RFI Positioning Belts Inclement Weather PrecautionsBatteries Reaching and BendingAlcohol Removable PartsElectromagnetic and Radio Frequency Interference EMI/RFI I . E M I / R FJet 10 Ultra T H E J E T 1 0 U L T R aJET 10 Ultra Specifications Jet 10 Ultra Power Base Jet 10 Ultra Electrical Components Electrical ComponentsTo engage or disengage the drive motors Manual Freewheel LeversSeat Installation To install the seatS S E M B L Y Seat Height and Seat Angle Adjustment Comfort AdjustmentsC O M F O R T a D J U S T M E N T S To change the seat heightTo adjust the seatback angle Seatback Angle AdjustmentTo adjust the recline angle Armrest Width AdjustmentC O M F O R T Controller Position To adjust the SFR lengthTo change the controller position Swing-away FootrestsTo adjust the ELR length To adjust the ELR angleTo adjust the anti-tip wheels To rotate the ELRsTochargethebatteriesusingtheoptionaloff-boardcharger TochargethebatteriesusingtheonboardchargerI . B a T T E R I E S a N D C H a R G I N G Batteries and ChargingFrequently Asked Questions FAQs Howdoesthechargerwork? Battery Break-inCan I use a different battery charger? How often must I charge the batteries?Why do my new batteries seem weak? How can I get maximum range or distance per charge?What type of batteries should I use? How should I store my power chair and its batteries? How can I ensure maximum battery life?What about public transportation? What about shipping?VSI Controller I I . O P E R a T I O NVSI consists JoystickKeypad Battery Condition MeterOn/Off Key AndelectricalsystemOKCharger Inhibit Connector Motor ConnectorsHorn Key Locking/Unlocking the VSIBattery Connector VSI Error CodesThermal Rollback Should your power chair come in contact with water Care and MaintenanceTemperature C a R E a N D M a I N T E N a N C EWeekly Checks Daily ChecksTo check the brakes Monthly ChecksStorage Cleaning Instructions Tire/Wheel ReplacementTo replace the batteries Battery ReplacementCorrective Maintenance When to See Your authorized Pride Provider for ServiceONE-YEAR Limited Warranty FIVE-YEAR Limited WarrantySIX-MONTH Warranty Warranty ExclusionsImplied Warranties Service Checks and Warranty ServiceT E S T E S Model # Serial #