Basic Operation Instructions | 13 |
2.Release the on/off key.
3.Move the joystick to the full forward position until it beeps.
4.Move the joystick to the full rearward position until it beeps.
5.Release the joystick. There will be one long beep. The controller system is now locked.
NOTE: The maximum speed indicator/battery condition meter will be rip- pling from side to side. The sequence will continue until the power is turned off or until the controller is unlocked.
To unlock the controller:
1.Press the on/off key to turn on the controller. The maximum speed indicator/ battery condition meter will ripple the “locked” sequence.
2.Move the joystick to the full forward position until it beeps.
3.Move the joystick to the full rearward position until it beeps.
4.Release the joystick. There will be one long beep. The controller system is now unlocked.
THERMAL ROLLBACK
The GC Controller is equipped with a thermal rollback circuit which monitors the temperature of the chair’s motors and controller. If either exceeds the safe operating temperature, the controller reduces the output to 50% of full operation level. This reduces the chair’s speed and allows a cool down period. Once the temperature returns to a safe level, the chair will resume normal operation.
FAULT CODES
The battery condition meter will flash fault codes when the controller system detects an abnormal condition in the electrical system. All of the battery condition meter LEDs will flash a number of times quickly, then pause, then flash again. The battery condition meter will continue to flash the fault codes until the problem is fixed. The table below identifies the individual fault codes. If any of these fault codes persist, contact your authorized Pride Provider.
www.pridemobility.com | GC Controller |