Pride Mobility INFMANU3355 manual GC Controller, Precautionary Guidelines

6 Basic Operation Instructions

GC CONTROLLER

The GC Controller is a fully-programmable, modular electronic controller system that allows you to operate your power chair. It is designed to allow the user to have complete control over chair movement and speed.

The controller has been pre-programmed to meet a typical user’s needs. The program is set using either a personal computer with software provided by the controller manufacturer or with a hand-held programmer, also provided by the controller manufacturer.

WARNING! The controller program can affect speed, acceleration, deceleration, dynamic stability, and braking. If it is programmed incorrectly or outside of the safe limits as determined by your healthcare professional, it can create a dangerous situation. Only the power chair manufacturer, an authorized representative of the manufacturer, or a trained service technician should program the controller.

PRECAUTIONARY GUIDELINES

Before operating the GC controller, please read the following. These guidelines are provided for your benefit and will aid you in the safe operation of the control system.

!Turn off the power to the controller when transferring to or from your power chair.

!Follow all of the procedures and heed the warnings as explained in your power chair owner’s manual.

Failure to heed the above warnings can result in personal injury and/or equipment damage.

GC Controller www.pridemobility.com