Pride Mobility Mobility Exterior LIft manual A T T E R Y C H a R G I N G, Battery Charging

Page 10

V . B A T T E R Y C H A R G I N G

BATTERY CHARGING

 

Follow these steps to charge the onboard battery:

 

1. Remove the onboard battery from the battery case and

 

place it near a standard electrical outlet.

 

2. Plug the charger cord into the mating socket located on

 

the bottom of the battery case, then connect the charger

 

cord to a standard electrical outlet. See figure 12.

 

NOTE: It is recommended that you replace the battery

 

every 3–5 years. Store the battery in a moisture-free

 

environment when not in use.

 

MANDATORY! Read the battery charging

 

instructions in this manual and in the

 

manual supplied with the battery charger

 

before charging the battery.

 

PROHIBITED! Never use an extension

Figure 12. Battery Charging

cord to plug in your charger cord. Plug

 

the charger cord directly into a properly

 

wired standard electrical outlet.

 

V . B A T T E R Y C H A R G I N G

BATTERY REPLACEMENT

WARNING! Battery posts, terminals, and related accessories contain lead and lead compounds. Wear goggles and wash hands after handling.

MANDATORY! Use only AGM or Gel-Cell batteries.

WARNING! Corrosive chemicals contained in battery. Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions.

WARNING! Contact with tools can cause electrical shock.

WARNING! Connect the battery harnesses in the proper manner. RED (+) cables must be connected to positive (+) battery terminals/posts. BLACK (-) cables must be connected to negative (-) battery terminals/posts. REPLACE cables immediately if damaged. Protective caps must be installed over all battery terminals.

NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call your authorized Pride Provider for instructions on disposal. Your authorized Pride Provider will also have the necessary information on battery recycling, which is our recommended course of action.

PROHIBITED! Removal of the grounding

prong can create an electrical hazard. If necessary, properly install an approved 3-pronged adapter to an electrical outlet having 2-pronged plug access.

PROHIBITED! Do not allow unsupervised children to play near the battery or battery charger while the battery is charging.

PROHIBITED! Do no expose the battery charger to rain or other sources of moisture unless it has been tested for outdoor use. Refer to the manual supplied with the battery charger for more information.

WARNING! Explosive gases may be generated while charging the battery. Keep the battery and the battery charger away from sources of ignition such as flames or sparks and provide adequate ventilation when charging the battery.

WARNING! Do not attempt to charge the battery and operate the lift system at the same time.

WARNING! Do not attempt to wire the lift system directly to the vehicle battery if the lift system is equipped with an onboard battery.

WARNING! You must recharge the lift system battery with the supplied battery charger. Do not use an automotive-type battery charger.

WARNING! If the battery is exposed to adverse or extreme weather conditions, then it must be allowed to adjust to the difference in environmental conditions before being charged.

WARNING! Inspect the battery charger, wiring, and connectors for damage before each use. Contact your authorized Pride Provider if damage is found.

WARNING! Do not attempt to open the battery charger case. If the battery charger does not appear to be working correctly, contact your authorized Pride Provider.

Follow these steps to replace the onboard bat- tery (figure 13):

1.Unfasten the battery securement strap located at the bottom of the battery box.

2.Remove the hardware from the battery secure- ment bracket and remove the bracket.

3.Remove the hardware from the battery connec- tor.

4.Slide the battery out of the battery box to expose the battery harness.

5.Disconnect the battery harnesses from the battery terminals.

6.Connect the battery harnesses to the new battery.

7.Slide the new battery into the battery box.

8.Reinstall the hardware to secure the battery con- nector and tighten.

9.Reinstall the battery securement bracket and tighten the hardware.

10.Refasten the battery securement strap.

If your lift system is exhibiting wear that you feel is questionable in any way, contact your authorized Pride Provider immediately. Do not attempt to repair, ad- just, or modify the manufacturer settings and materi- als.

 

BATTERY BOX

BATTERY SECUREMENT BRACKET

BATTERY SECUREMENT STRAP

BATTERY CONNECTOR

Figure 13. Battery Replacement

16

www.pridemobility.com

Exterior Lift System

Exterior Lift System

www.pridemobility.com

17

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SilverStar F E T Y G U I D E L I N E S N T E N T S IIIInformation Exchange N T R O D U C T I O NInternet and Private Purchases PURCHASER’S Agreement Pride Owners ClubProduct Safety Symbols S a F E T YHitch Class Information InstallationLifting Capabilities Lifting NON-PRIDE ProductsFollow these steps to install the Lock-Down-Arm I . InstallationExterior Lift System Installation Follow these steps to install the Exterior Lift SystemWiring Harness Installation Follow these steps to install the onboard batteryFollow these steps to operate the Exterior Lift System O P E R a T I O NExterior Lift System Operation Manual Exterior Lift OperationA T T E R Y C H a R G I N G Battery ChargingBattery Replacement Follow these steps to replace the onboard bat- tery figureTroubleshooting I . TroubleshootingCare and Maintenance C a R E a N D M a I N T E N a N C EI I . Specification S W a R R a N T YINFMANU3279

Mobility Exterior LIft specifications

Pride Mobility has established itself as a leader in mobility solutions, and one of its standout products is the Mobility Exterior Lift. Designed for those who require assistance in transporting their mobility devices, this lift combines innovation with user-friendly features tailored to enhance the freedom of movement.

The Mobility Exterior Lift is crafted with both safety and convenience in mind. Its robust construction allows it to accommodate a variety of scooters and power wheelchairs. With a weight capacity typically ranging from 350 to 400 pounds, it ensures that most mobility devices can be securely loaded and transported without compromise.

One of the defining features of the Mobility Exterior Lift is its easy installation process. The lift is designed to fit onto a wide range of vehicles, including SUVs, vans, and trucks, making it a versatile option for users. It comes with a vehicle-specific mounting bracket that enhances the stability of the lift when in use. Additionally, the lift boasts a power assist function, allowing users to effortlessly raise and lower their mobility device with just the press of a button.

Safety is paramount, and the Mobility Exterior Lift is equipped with several safety features. The lift includes a secure locking mechanism that ensures the device remains in place during transport. Furthermore, the lift is designed to prevent accidental disengagement, reducing the risk of accidents while driving. The incorporation of reflective strips and bright colors also enhances visibility in low-light conditions, contributing to overall safety.

The technology behind the Mobility Exterior Lift is equally impressive. It utilizes hydraulic or electric systems that provide smooth and effortless operation. Users can control the lift from their vehicle’s interior, ensuring a seamless experience when loading or unloading their mobility device. The lift also features a manual override, giving users peace of mind in case of a power failure.

In terms of design, the Mobility Exterior Lift is built to withstand the elements. Its weather-resistant finish helps protect it from rust and corrosion, ensuring durability over time. The compact design minimizes the impact on the vehicle's aerodynamics and overall appearance while maximizing the functionality.

In summary, the Pride Mobility Mobility Exterior Lift represents an ideal solution for individuals seeking independence and ease of transport. Combining innovative technology with robust safety features and a user-friendly design, this lift empowers users to enjoy their outdoor experiences without hindrance. Whether for daily errands or leisurely outings, the Mobility Exterior Lift enhances mobility and freedom for its users.
Top Page Image Contents