O P E R a T I O N | Pride Mobility Mobility Exterior LIft guide

I V . O P E R A T I O N

EXTERIOR LIFT SYSTEM OPERATION

WARNING! The Exterior Lift System is intended for the transport of mobility devices only. The mobility device must be unoccupied before operating the lift.

WARNING! Do not exceed the load limits of your vehicle or hitch system as specified by the vehicle manufacturer.

WARNING! Use extreme caution when driving with the lift installed on your vehicle. Be aware that the lift extends away from the back of the vehicle and extra clearance is needed when backing up, turning, parking, or driving through driveway entrances/exits. Drive slowly when negotiating pot holes, road bumps, and railroad tracks.

I V . O P E R A T I O N

WARNING! For lift systems equipped with the automatic lock-down arm, do not attempt to adjust the pressure of the arm. This feature has been configured by your authorized Pride Provider to meet your needs and requires no further adjustment.

WARNING! If your scooter is equipped with pneumatic drive tires, make sure the tires are inflated to the recommended pressure labeled on the tire sidewall. This will ensure that the scooter is at the correct deck height for proper lock-down arm positioning.

NOTE: Inspect the tie-down straps before each use to ensure there are no signs of fraying or wear. Ensure that the mobility device is secured properly before transport. Pride is not liable for damage or loss resulting from improper securing of a mobility device.

Follow these steps to operate the Exterior Lift System:

1.Insert the key into the key switch.

2.Turn and hold the key clockwise to lower the lift plat- form. See figure 9. Release the key as soon as the lift platform touches the ground.

3.Set the speed control of the mobility device to the slow- est setting and carefully drive your mobility device onto the lift platform, being sure to center the mobility device on the platform to the best of your ability.

NOTE: You may wish to load the mobility device while standing next to it using the manual freewheel feature. Refer to the mobility device owner’s manual for more information on manual freewheel mode.

4.Shut down the power to the mobility device, remove the key if applicable, and make sure the unit is in drive mode (drive motors engaged). Refer to the mobility device owner’s manual for more information on drive mode.

WARNING! Never leave a mobility device in manual freewheel mode during lift

Figure 9. Key Switch Operation

6.Turn and hold the key counterclockwise to raise the lift. See figure 9. Continue to raise the lift until the motor stops, then release the key.

NOTE: As the lift platform rises, the automatic lock-down arm activates to secure the scooter to the lift platform. You may need to adjust the scooter tiller position to prevent interference with the smooth operation of the automatic lock-down arm.

NOTE: The motor will stop automatically at the top of its stroke and will emit a clicking sound. Release the key immediately upon hearing this sound, then turn the key counterclockwise one more time for no more than 2 seconds to ensure the platform is in the fully raised position.

NOTE: Pay attention to the path of the lift platform during operation. Make sure the lift does not rub against or interfere with the vehicle in any way. If you notice any contact between the lift platform and the vehicle, stop lift operation immediately and contact your authorized Pride Provider for assistance.

Follow these steps to remove a mobility device from the Exterior Lift System:

1.Lower the lift platform to the ground.

2.Unfasten the tie-down straps or allow the lock-down arm to automatically return to the vertical position.

3.Unload the mobility device from the lift platform.

4.Raise the lift platform for storage, noting that it will automatically fold into a stowed position.

5.Remove the key from the lift system when it is not in use.

system transport, as the mobility device could roll

5.Secure the mobility device to the platform using either the retractable tie-down straps (see figure 10) for power chairs or the automatic lock-down arm for scooters.

WARNING! Never attempt to secure the tie-down straps over the seatback or armrests of a mobility device.

Figure 10. Retractable Tie-Down Straps

WARNING! Do not attempt to manually pull the lift platform down from the stowed position. Doing so will result in product damage and will void the product warranty.

MANUAL EXTERIOR LIFT OPERATION

The lift system is equipped with a manual crank that serves as backup in the event of a power failure. Using the supplied tool, rotate the manual crank (located on top of the motor housing) clockwise or counterclockwise to move the plat- form up or down. See figure 11.

MANUALCRANK

MOTOR HOUSING

Figure 11. Manual Crank Operation

www.pridemobility.com

Exterior Lift System

www.pridemobility.com

Mobility Exterior LIft specifications

Pride Mobility has established itself as a leader in mobility solutions, and one of its standout products is the Mobility Exterior Lift. Designed for those who require assistance in transporting their mobility devices, this lift combines innovation with user-friendly features tailored to enhance the freedom of movement.

The Mobility Exterior Lift is crafted with both safety and convenience in mind. Its robust construction allows it to accommodate a variety of scooters and power wheelchairs. With a weight capacity typically ranging from 350 to 400 pounds, it ensures that most mobility devices can be securely loaded and transported without compromise.

One of the defining features of the Mobility Exterior Lift is its easy installation process. The lift is designed to fit onto a wide range of vehicles, including SUVs, vans, and trucks, making it a versatile option for users. It comes with a vehicle-specific mounting bracket that enhances the stability of the lift when in use. Additionally, the lift boasts a power assist function, allowing users to effortlessly raise and lower their mobility device with just the press of a button.

Safety is paramount, and the Mobility Exterior Lift is equipped with several safety features. The lift includes a secure locking mechanism that ensures the device remains in place during transport. Furthermore, the lift is designed to prevent accidental disengagement, reducing the risk of accidents while driving. The incorporation of reflective strips and bright colors also enhances visibility in low-light conditions, contributing to overall safety.

The technology behind the Mobility Exterior Lift is equally impressive. It utilizes hydraulic or electric systems that provide smooth and effortless operation. Users can control the lift from their vehicle’s interior, ensuring a seamless experience when loading or unloading their mobility device. The lift also features a manual override, giving users peace of mind in case of a power failure.

In terms of design, the Mobility Exterior Lift is built to withstand the elements. Its weather-resistant finish helps protect it from rust and corrosion, ensuring durability over time. The compact design minimizes the impact on the vehicle's aerodynamics and overall appearance while maximizing the functionality.

In summary, the Pride Mobility Mobility Exterior Lift represents an ideal solution for individuals seeking independence and ease of transport. Combining innovative technology with robust safety features and a user-friendly design, this lift empowers users to enjoy their outdoor experiences without hindrance. Whether for daily errands or leisurely outings, the Mobility Exterior Lift enhances mobility and freedom for its users.