I V . U N P A C K I N G A N D A S S E M B L Y
6.Remove the plastic wrap from the seat posts and remove the seatback screws. See figure 6.
7.Flip up the armrests.
8.Unfold the seatback and insert the canes into base assembly. The smaller pouch faces rearward. You may store the toolkit in the smaller pouch.
9.Insert the seatback screws back into the seat canes with the screw head on the inside. See figure 7.
10.Install two
11.The controller is shipped so that it may be installed on either armrest. Once you have determined which armrest to use, install the controller bracket so it is on the inside of the controller. The bracket is installed either on the left side of the controller for a
12.Insert the controller into the armrest. See figure 10. The controller must be oriented with the decal facing outward.
FOLD UP ARMS.
REMOVE
SEATBACK
SCREWS.
INSTALL SCREWS WITH SCREW HEAD ON THE INSIDE.
|
|
|
|
|
|
| INSTALL |
|
|
|
|
|
|
| BATTERY |
FASTEN |
|
|
|
|
| BOXES. | |
| |||||||
|
|
|
|
| |||
|
|
|
| CONNECT BATTERY | |||
|
|
|
| ||||
STRAPS. |
|
|
|
|
| BOXES (RED | |
|
|
|
|
| |||
|
|
|
|
|
| CONNECTORS). |
Figure 6. Pride LX Back View
FASTEN SEATBACK TO FRAME.
Figure 7. Seatback
Screw Installation
INSTALL LABEL ON OPPOSITE SIDE OF JOYSTICK/CONTROLLER BRACKET.
Figure 9. Controller Label Installation
Figure 8. Tie-Wrap Installation
16 | www.pridemobility.com | Pride LX Series/Rev B/Feb 03 |