Pride Mobility LX11, LX12, LX10 owner manual C O M F O R T a D J U S T M E N T S

V I . C O M F O R T A D J U S T M E N T S

After you have used your Pride LX for an extended period of time, you may find the need to make some adjustments to increase your comfort. You can change the armrest height, the swing-away footrest length, the controller position, or the seatback height.

WARNING! If your Pride LX was configured at your authorized Pride provider, please consult your healthcare professional before changing the seat position or making any other adjustment. Some adjustments may degrade your LX’s performance and safety by changing its center of gravity.

Armrest Height

You can change the armrest height in 1-in. increments. There are five different heights.

To change the armrest height:

1.Pull out the armrest lever to release the armrest. See figure 20.

2.Move the armrest up or down.

3.Release the armrest lever to lock the armrest.

Swing-away Footrest Length

You can change the footrest length in 1-in. increments.

To change the footrest length:

1.Use a 6-mm hex key to loosen the footrest setscrew. See figure 21.

2.Slide the footrest up or down to the desired length.

3.Tighten the 6-mm setscew.

4.Repeat for the other side.

Controller Position

You may change the position of the controller by sliding it in or out of its bracket. See figure 22.

To change the controller position:

1.Loosen the thumbscrew.

2.Slide the controller to the desired position.

3.Tighten the thumbscrew.

PULL OUT TO CHANGE ARMREST HEIGHT.

Figure 20. Armrest Height Adjustment

LOOSEN SETSCREW TO

CHANGE FOOTREST

LENGTH.

Figure 21. Swing-away Footrest

LOOSEN THUMBSCREW TO

CHANGE CONTROLLER POSITION.

Figure 22. Controller Position

22 www.pridemobility.com Pride LX Series/Rev B/Feb 03