V I I I . A S S E M B LY A N D D I S A S S E M B LY
11.Put the batteries in place and plug the
12.Connect the battery
13.If you removed the utility tray from the rear component, connect the
14.Gently place the rear shroud over the seat pedestal.
15.Connect the rear light harness. See figure 22. Make sure that the rear plastic shroud does not make any contact with the rear wheels.
16.Slide the shroud down in place.
17.Carefully lift the seat and slide the small seat post (on the seat bottom) into the seat post tower. See figure 23.
18.Rotate the seat until it locks into place.
Figure 20. Connect Battery Harnesses
Figure 22. Connect Rear Light Harness
Figure 19. Put Batteries in Place
Figure 21. Connect Motor Harness Plug
Figure 23. Slide the Seat into Place
28 | Hurricane |