Sunrise Medical Quickie V-121 Transfers, Reaching or Leaning, Dressing or Changing Clothes

Page 8

V I .

G E N E R A L W A R N I N G

 

 

N. TRANSFERS

It is dangerous to transfer on your own. It requires good balance and agility. Be aware that there is a point during every transfer when the wheelchair seat is not below you.To avoid a fall:

1.Always turn off power before you transfer to or from your chair. If you fail to do so you may touch the joystick and cause your chair to move when you do not expect it.

2.Make sure motor locks are engaged.This keeps the chair from moving when you transfer.

3.Work with your health care professional to learn safe methods.

Learn how to position your body and how to support yourself during a transfer.

Have someone help you until you are sure you can do a safe transfer on your own.

4.Move your chair as close as you can to the seat you are transferring to. If possible, use a transfer board.

5.Rotate the front casters until they are as far forward as possible.

6.Be careful of the footrests. If you can, remove or swing them out of the way.

Never stand on footrests when you transfer. Doing so may damage them or cause your chair to tip.

Make sure your feet do not “hang up” or get caught in the space between the footrests.

7.Make sure armrests do not interfere.

8.Transfer as far back onto the seat surface as you can.This will reduce the risk that you will miss the seat or fall.

V I .

G E N E R A L W A R N I N G S

 

 

O. REACHING OR LEANING

Reaching or leaning affects the center of balance of your chair. If done improperly, a fall or tip-over is likely.When in doubt, ask for help or use a device to extend your reach.

TO REDUCE THE RISK AND/OR DAMAGE TO THE CHAIR:

1.Never reach or lean if you must shift your weight sideways or rise up off the seat.

2.Never reach or lean if you must move forward in your seat to do so. Always keep your buttocks in contact with the backrest.

3.Never reach with both hands (you may not be able to catch yourself to prevent a fall if you lose your balance).

4.Never try to pick up an object from the floor by reaching down between your knees.

5.Never put pressure on the footrests while reaching.This may cause the chair to tip if you lean too far.

6.Never reach or lean over the top of the seat back.This may damage the back- rest and cause you to fall.

IF YOU MUST REACH OR LEAN; DO SO AT YOUR OWN RISK. Remember to:

1.Move your chair as close as you can to the object you wish to reach.

2.Rotate the front casters until they are as far forward as possible.This makes the chair more stable. Note: To do this: Move your chair past the object you want to reach, then back up alongside it. Backing up will rotate the casters forward.

3.Turn off all power to your chair. If you fail to do so, you may touch the joystick and cause your chair to move when you do not expect it.

4.Firmly grasp a rear wheel or an armrest with one hand.This will help to prevent a fall if the chair tips.

P.DRESSING OR CHANGING CLOTHES

Be aware that your weight will shift if you dress or change clothes while seated in this chair.To make the chair more stable, rotate the front casters until they are forward.

930483 Rev. A

14

15

930483 Rev. A

Image 8
Contents Quickie Sunrise Listens For Answers to Your QuestionsEMI Electromagnetic Interference VII. Warnings Components & OptionsCheck-Out To Find & Correct a Problem Connecting Batteries in Battery BoxesMaintenance Chart Rear Wheel Locks OptionalChoose the Right Chair & Safety Options Adjust Chair to Your AbilityQuickie Review this Manual OftenWhat is EMI? What Effect can EMI HAVE?Sources of EMI Distance from the SourceWeight Limit Controller SettingsSafety CHECK-LIST Changes & AdjustmentsWhen Seated in a Parked Wheelchair Motor Vehicle SafetyEnvironmental Conditions TerrainTransfers Reaching or LeaningTo Reduce the Risk AND/OR Damage to the Chair Dressing or Changing ClothesObstacles Driving in ReverseRAMPS, Slopes & Side Hills BewareRamps AT Home & Work Wheelchair LiftsCurbs & Single Steps StairsON/OFF Switch ANTI-TIP LeversArmrests BatteriesPositioning Belts Optional Push HandlesRear Wheel Locks Optional Seating SystemsTo Climb a Curb or Single Step To Descend a Curb or Single StepTo Find & Correct Problem Tools YOU will NeedCHECK-OUT Elevating Legrest OptionalFLIP-BACK HEIGHT- Adjustable Armrests Optional Joystick SWING-AWAY Retractable Mount OptionalFLIP-BACK Armrests Folding and UnfoldingControl Settings Quickie Qtronix Programming PAD OptionalThermal ROLL-BACK Circuit BreakersIntegral Joystick Acid Burns Battery ChargerIntroduction Connecting Batteries in Battery Boxes Charging BatteriesMake sure to allow enough time to fully charge batteries Disposing of BatteriesStorage Tips CleaningBattery Maintenance Maintenance Chart To Repair or Replace a TireMotor Brushes Ordering PartsAdditional Warranty For 5 YearsLimitations What WE will doSunrise Medical