Operation Information

SECTION 1—GENERAL GUIDELINES

Performance adjustments should only be made by professionals of the healthcare field or persons fully conversant with this process and the driver's capabilities. Incorrect settings could cause injury to the driver, bystanders, damage to the wheelchair and to surrounding property.

After the wheelchair has been set-up/adjusted, check to make sure that the wheelchair performs to the specifications entered during the set-up procedure. If the wheelchair does NOT perform to specifications, turn the wheelchair Off immediately and reenter set-up specifications. Repeat this section until the wheelchair performs to specifications.

DO NOT leave the power button On when entering or exiting your wheelchair.

DO NOT attempt to drive over curbs or obstacles greater than 3 inches for TDX 5 and TDX 4 or greater than 2 inches for TDX 3. Doing so may cause your wheelchair to turn over and cause bodily harm or damage to the wheelchair. ALWAYS stop before climbing an obstacle. Approach slowly until casters contact the obstacle. Apply power and the action of the SureStep feature will lift the casters over the obstacle. Weight is transferred to the drive wheels providing traction and motor strength to power the wheelchair over the obstacle.

DO NOT operate on roads, streets or highways.

DO NOT climb, go up or down ramps or traverse slopes greater than 9°.

DO NOT attempt to move up or down an incline with water, ice or oil film.

DO NOT stand on the frame of the wheelchair.

DO determine and establish your particular safety limits by practicing bending, reaching and transferring activities in the presence of a qualified healthcare professional before attempting active use of the wheelchair.

DO NOT attempt to reach objects if you have to move forward in your seat.

DO NOT attempt to reach objects if you have to pick them up from the floor by reaching between your knees.

DO NOT lean over the top of the back upholstery to reach objects behind you, as this may cause the wheelchair to tip over.

ALWAYS shift your weight in the direction you are turning. DO NOT shift your weight in the opposite direction of the turn. Shifting your weight in the opposite direction of the turn may cause the inside drive wheel to lose traction and the wheelchair to tip over.

DO NOT shift your weight or sitting position toward the direction you are reaching as the wheelchair and/or seating system (if any) may tip over.

DO NOT use an escalator to move a wheelchair between floors. Serious bodily injury may occur.

DO NOT use the footplates as a platform. When getting in or out of the wheelchair, make sure that the footplates are in the upward position or swing footrests towards the outside of the wheelchair.

NEVER leave an unoccupied wheelchair unattended on an incline.

TDX™ Wheelchairs

Part No 1143150

TDX 5, TDX 3, TDX 3 SE, TDX 4 specifications

Invacare has established itself as a leading manufacturer of mobility solutions, and its TDX series of power wheelchairs exemplifies the company's commitment to innovation, comfort, and user-centric design. The TDX 4, TDX 3 SE, TDX 3, and TDX 5 are prominent models within this series, each equipped with cutting-edge features and technologies that cater to the diverse needs of users.

The TDX 4 is designed for superior maneuverability and driving performance. It boasts a unique Mid-Wheel Drive technology, which ensures that the chair can pivot in place with ease, allowing users to navigate tight spaces effortlessly. The TDX 4 is equipped with a highly adjustable seating system and a modular design that allows for customization based on user preferences and needs. With an active anti-tip system, the TDX 4 ensures stability on slopes and uneven terrains, enhancing user safety.

Next in the lineup is the TDX 3 SE, which emphasizes enhanced seating and suspension systems. Users can enjoy a smooth ride thanks to its advanced suspension that absorbs shocks and vibrations. The TDX 3 SE offers flexible seating options, including tilt, recline, and elevating legrests, allowing for optimal positioning and comfort. With a robust driving range, the TDX 3 SE is perfect for individuals looking to explore their surroundings while ensuring adequate support and comfort.

The TDX 3, another noteworthy entry, incorporates many of the features found in its siblings but is tailored for those who need a more straightforward approach. This model is lightweight yet durable, making it easy to transport and manage. With a focus on reliability and ease of use, the TDX 3 is an excellent choice for individuals who prioritize practicality without compromising on quality.

Finally, the TDX 5 stands out with its advanced technological integration. It features smart technology that allows for intuitive control and customization. The control systems are designed to be user-friendly, accommodating those with varying levels of dexterity. Advanced battery technology ensures long-lasting performance, while the ergonomic design promotes comfort during extended use.

In conclusion, the Invacare TDX series—including the TDX 4, TDX 3 SE, TDX 3, and TDX 5—offers a range of features that cater to different mobility needs. With their focus on maneuverability, comfort, and technological innovation, these power wheelchairs empower users to regain independence and enjoy a more active lifestyle.