- 12 -
7.0 Using the Power Base Joysticks
7.1 Using the Quickie Q-TRONIX Remote Joystick
The remote joystick connects to the Q-Tronix Controller, which in turn controls the performance of the power base. By pressing down and releasing the on/off mode select toggle switch, the controller is placed in the standard drive selection mode. To place the controller in the power positioning mode, the on/off mode select toggle switch must be pulled up twice. The power positioning options are selected by using the left and right directions on the joystick. The power positioning function that is selected will be highlighted on the actuator lights (see chart). To operate the selected power posi- tioning function, the forward and reverse directions on the joystick are used. To return to the standard drive selection mode, the on/off mode select toggle switch must be pulled up once again.
Note: Please refer to the Quickie Owners Manual for complete joystick set-up and operating instructions.
L3
L4
L2
L1
ACTUATOR LIGHTS
JOYSTICK
| ON/OFF MODE SELECT |
| TOGGLE SWITCH | |
Function | | Actuator Light |
| L1 | L2 | L3 | L4 |
*Tilt/Recline | | | + | + |
Right Legrest | + | | | |
Left Legrest | | + | | |
Both Legrests | + | + | | |
Elevating Seat | | | + | |
*Push forward on joystick to tilt and pull back on the joystick to recline (i.e. operates in “auto-reversing mode”)
TRD0000, TRx Owner’s Manual- Rev. 5.0, January 20, 2005