SEAT BACKAND
SECTION 5 | SEAT AND BACK | |
|
|
|
Section 5 - Seat and Back includes the following:
Replacing Back Upholstery
Replacing Seat Upholstery
REPLACING BACK UPHOLSTERY (FIGURE 1)
1.Remove the eight (8) phillips screws and eight (8) washers that secure the existing back upholstery to the back canes.
2.Remove existing back upholstery from the back canes.
3.Securely tighten the new back upholstery to the back canes with the phillips screws and washers.
Back Canes
Back Upholstery
Washers
Phillips | Washers |
Screws |
FIGURE 1 - REPLACING BACK UPHOLSTERY
REPLACING SEAT UPHOLSTERY (FIGURE 2)
1.Remove the eight (8) phillips screws and eight (8) washers that secure the existing seat upholstery to the crossbraces.
2.Remove the EXISTING seat upholstery from the crossbraces.
3.If used, ensure position of seat positioning strap. Refer to INSTALLING THE SEAT POSITIONING STRAP in SECTION 10 of this manual.
4.Install NEW seat upholstery by reversing STEPS
Phillips Screws
Seat Upholstery
FIGURE 2 - REPLACING SEAT UPHOLSTERY
INVACARE MX | 18 | Part No. 1119240 |