Invacare MX manual Changing SEAT-TO-FLOOR Height Figure, SEAT-TO-FLOOR Height Section

SEAT-TO-FLOOR HEIGHT SECTION 9

Section 9 - Seat-to-Floor Height includes the following:

Changing Seat-To-Floor Height

CHANGING SEAT-TO-FLOOR HEIGHT (FIGURE 1)

WARNING

Seat-to-floor heights have specific positions depending on rear wheel size, rear wheel position, and front caster position. These adjustments MUST be performed by a qualified technician.

1.Refer to the following chart in FIGURE 1 to determine mounting positions for front casters/forks and rear wheels for the desired obtainable seat-to-floor height.

2.Remove the rear wheels from the wheelchair. Refer to REMOVING/INSTALLING THE REAR WHEELS in SECTION 6 of this manual.

3.Remove the front casters from the wheelchair. Refer to REPLACING FRONT CASTERS in SECTION 7 of this manual.

4.Reinstall the rear wheels onto the wheelchair in the mounting position indicated in the chart. Refer to REMOVING/INSTALLING THE REAR WHEELS in SECTION 6 of this manual.

5.Re-install the front casters onto the wheelchair in the mounting position indicated in the chart. Refer to REPLACING FRONT CASTERS in SECTION 7 of this manual.

8-INCH FRONT CASTERS

SEAT-TO-FLOOR	FRONT CASTER	REAR	REAR WHEEL
HEIGHT	MOUNTING	WHEEL	MOUNTING
(in inches)	POSITION	SIZE	POSITION
17-1/2	TOP	24-inch	TOP
19-1/2	BOTTOM	24-inch	BOTTOM

REAR WHEEL MOUNTING	FORK
POSITIONS	MOUNTING POSITIONS

TOP	TOP
BOTTOM
	MIDDLE
	BOTTOM

FIGURE 1 - CHANGING SEAT-TO-FLOOR HEIGHT

SEAT-TO-FLOOR HEIGHT

Part No. 1119240 23 INVACARE MX