REAR WHEELS | SECTION 6 | |
|
|
|
Section 6 - Rear Wheels includes the following:
Removing/Installing the Rear Wheels
REMOVING/INSTALLING THE REAR WHEELS (FIGURE 1)
WARNING
If a change in the
Make sure both rear wheels are the same size and are installed into the same respective mounting hole BEFORE using the wheelchair, otherwise injury may occur.
1.Remove the dust cap, hex screw, washer, spacer and locknut that secure the rear wheel to the wheelchair frame.
2.Repeat STEP 1 for the opposite rear wheel.
3.To reinstall the rear wheel(s) onto the wheelchair, reverse STEPS
4.Adjust wheel locks. Refer to WHEEL LOCK ADJUSTMENT in SECTION 8 of this manual.
| Locknut |
Rear Wheel | Axle Mounting Hole |
|
Wheelchair Frame
Dust Cap
Spacer
Hex Screw
FIGURE 1 - REMOVING/INSTALLING THE REAR WHEELS
REAR WHEELS
Part No. 1119240 | 19 | INVACARE MX |