Panasonic CZ-RD515U service manual which may cause a unit breakdown

Page 3
which may cause a unit breakdown."

Manual backgroundWarning

If refrigerant gas blows off during the work, do not touch the refrigerant gas as it may cause frostbite.

 

 

Prohibit

If refrigerant gas leaks during the work, ventilate the room.

 

If refrigerant gas catches fire, harmful gas may be generated.

 

 

 

Do not mix any gas other than the specified refrigerant gas in the refrigerating cycle.

 

If air or other contaminants mix with the gas, pressure will become extremely high in the refrigerating cycle,

 

which may cause a unit breakdown."

Prohibit

 

 

When the welded section of the compressor intake or discharge pipe is to be disconnected, perform it in

 

a well-ventilated place after sufficiently recovering the refrigerant gas.

 

Any residue gas may jet out refrigerant or refrigerating machine oil, which may cause an injury.

 

 

 

When the work is to be performed in a high place (About 2 meters or more), make sure to wear a safety helmet,

 

gloves and safety belt. Insufficient safety gear may cause a serious injury in case of a fall.

 

 

 

When the unit is to be relocated, confirm that the new installation location has sufficient strength for the weight of the unit.

 

Insufficient strength of the installation location and incomplete installation work may cause an injury due to

 

the unit falling.

 

 

 

When the remote controller batteries are replaced, dispose of the old batteries out of the reach of children.

 

If a child swallows a battery, make sure that the child gets immediate medical attention.

 

 

 

Manual backgroundCaution

Do not wash the air conditioner with water, as this may cause an electric shock or fire.Manual background Prohibit

For the repair work in places with high humidity or moisture, make sure to ground the unit.

Failure to do so may cause an electric shock.

Confirm that the component attachment position, wiring condition, soldering condition and connector connection are normal.

If not, it may cause overheating or fire.

Confirm that the temperature around the compressor is not too high, and then perform the repair work.

Failure to do so may cause a burn.

Perform welding work in a place with good ventilation.

If the work is performed in a poorly ventilated area, it might cause a lack of oxygen.

If the installation plate or attachment frame has deteriorated due to corrosion, etc., replace it.

Failure to do so may cause an injury due to the unit falling.

When the cleaning is to be performed, make sure to turn off the power and pull out the plug.

Touching the fan that is rotating at high speed may result in an injury.

When the indoor unit is to be removed, do not place it on an incline.

Doing so may cause wet furniture because water left inside may trickle down.

Prohibit

Do not hold the sharp end of the unit or the aluminum fins, as it may cause an injury to your hand or finger.Manual background Prohibit

After repairs, make sure to measure the insulation resistance and confirm that the value is 1 Mohm or more.

Any insulation error may cause an electric shock.

After repairs, make sure to check the drainage of the indoor unit.

Inappropriate drainage may cause wet furniture and floors due to water leakage.

3

Image 3
Contents Product Code No CZ-RD515UWIRED REMOTE CONTROLLER Model NoSAFETY PRECAUTIONS which may cause a unit breakdown Operating Instructions Table of ContentsINSTALLATION INSTRUCTIONS FUNCTIONS1. SPECIFICATIONS 2 Wall mounted type 2. APPLICABLE INDOOR UNITS3. FUNCTIONS 1 Ceiling cassette type4. SELF-DIAGNOSTICS 4-1. Self-DiagnosticsProcedurePROCEDURE REMOTE CONTROL receiver 4-2. Self-DiagnosticsTable Ceiling Cassette TypeTIMER lamp HIGH POWER lampDIAGNOSIS CONTENTS 4-3. Self-DiagnosticsTable Wall Mounted Type1 OPERATION lamp 2 TIMER lamp 3 QUIET lamp OPERATION button REMOTE CONTROL receiverINDOOR UNIT 4-4. Self-DiagnosticsTable Wall Mounted Type2 TIMER lamp DIAGNOSIS CONTENTSPage CZ-RD515U APPENDIX A Operating InstructionsModel No. CZ-RD515U Operating Instructions Wired Remote ControllerPRODUCT INFORMATION FEATURESCONTENTS SAFETY PRECAUTIONSAvoid INSTALLATION LOCATIONSAFETY INSTRUCTIONS ELECTRICAL REQUIREMENTSDisplay REMOTE CONTROLLERTemperature setting buttons TEMP Timer and Present Time setting buttonsHEAT 1 HR. TIMER button 1-HOUROFF TIMERTIMER SELECT button AUTOSymbols REMOTE CONTROLLER DISPLAY2. Manual Operation OPERATION WITH THE REMOTE CONTROLLER1.Automatic Operation only for COOL/DRY/HEAT ModelRemote Controller Display 3. Adjusting the Fan SpeedPower failure during operation Remote Controller3. How to set the ON time SETTING THE TIMER1. How to set the present time 2. How to set the OFF timeUSING THE 1-HOUROFF TIMER ADJUSTING THE AIRFLOW DIRECTION1. 1-HourOFF Timer Page CZ-RD515U APPENDIX B INSTALLATION INSTRUCTIONS CZ-RD515UHow to install the remote controller INSTALLATION INSTRUCTIONS Wired Remote ControllerParts supplied with the remote controller Remote controller installation guidelinesFig. 2-b A. Installing with in-walljunction boxB. Installing directly onto the wall Fig. 2-aFig. 8-b How to wire the remote controllerFig. Fig. 8-aHow to Test Run the Air Conditioner Page CZ-RC515U APPENDIX CFig. 2a INSTALLATION INSTRUCTIONS Connection KitInstalling the connection kit Parts included in the packageFig. 5a Fig. 4bFig. 4a Fig. 4cB. 18000 BTU and 24000 BTU inverter models Fig. Fig How to Test Run the Air ConditionerPage CZ-RC515UA APPENDIX D INSTALLATION INSTRUCTIONSInstalling the connection kit Parts included in the packageINSTALLATION INSTRUCTIONS Connection Kit KDUQHVV Wire harnessRQQHFWRU% LUHKDUQHVVODPS 1RLVHILOWHU LUHKDUQHVV Wire harness ClampOpen hole Wire harness  5HLQVWDOOWKHHOHFWULFDOERFRYHUHow to Test Run the Air Conditioner 7URXEOHVKRRWLQJFig. Fig Page DC1111-0
Related manuals
Manual 42 pages 22.63 Kb

CZ-RD515U specifications

Panasonic has consistently been a leader in providing effective HVAC solutions, and the CZ-RD515U model exemplifies this dedication. This advanced remote controller is designed to enhance the user experience when managing Panasonic’s air conditioning and heat pump systems.

One of the standout features of the CZ-RD515U is its versatility. The remote can control multiple indoor units, making it suitable for both residential and commercial applications. The device supports a variety of operation modes, including cooling, heating, and auto mode, allowing users to tailor the climate control to their specific needs.

The unit boasts a clear LCD display that shows operational status, temperature settings, and mode selection, ensuring easy readability from a distance. Users can effortlessly adjust temperature settings to maintain an optimal comfort level using intuitive buttons. Additionally, the remote features a timer function, allowing users to program start and stop times for their HVAC systems, which helps in saving energy and improving efficiency.

Another significant technology integrated into the CZ-RD515U is the super quiet operation mode. This feature allows users to set their air conditioning system to operate at lower noise levels, making it ideal for nighttime use or quiet zones. Furthermore, the remote controller includes a "powerful" function, which provides a temporary boost in power to reach desired temperatures more quickly, enhancing overall comfort in the space.

Panasonic has also incorporated a user-friendly design into the CZ-RD515U, with a lightweight structure and ergonomic grip, making it easy to hold and operate. The remote is equipped with a protective cover to safeguard against dust while not in use. Each remote can function under a considerable distance range, providing convenience in larger spaces.

Moreover, the CZ-RD515U takes advantage of advanced wireless communication, ensuring reliable control without the hindrances of wired connections. This flexibility underlines Panasonic’s commitment to user-centric design, merging functionality with cutting-edge technology to deliver superior comfort solutions.

Ultimately, the Panasonic CZ-RD515U stands out for its thoughtful features and functionalities, making it a reliable and efficient option for controlling your heating and cooling systems effortlessly. Its advanced capabilities, ease of use, and quiet operation make it a valuable addition to any home or business environment.