PROCEDURE 3 | REAR WHEEL/TRANSMISSION |
R E A R
W
H
INSTALLING/REMOVING THE AXLE BOLT (FIGURE 4)
Installing
1.If necessary, install rear wheel onto transmission rear hub. Refer to INSTALLING/REMOVING THE REAR WHEEL TO/FROM THE TRANSMISSION REAR HUB in this procedure of the manual.
2.Insert axle bolt through rear wheel bearing.
3.Slide inner hub spacer, axle washer and outer hub spacer over axle bolt.
4.Secure axle bolt to wheelchair side frame with hex nut. Tighten securely.
Removing
1.Remove hex nut securing axle bolt to wheelchair side frame.
2.Remove axle bolt from wheelchair side frame.
3.Remove inner hub spacer, axle washer and outer hub spacer from axle bolt.
4.Remove axle bolt from rear wheel bearing.
E E L
T
R A N S M I S S I O N
Wheelchairs Built BEFORE 09/05/00
Outer | Wheelchair |
Hub | Side Frame |
Spacer |
|
Rear Wheel | Axle Washer |
| |
Hub Spokes |
|
Hex Nut
Rear Wheel
Bearing | Transmission |
Assembly
Axle Bolt
|
|
| Inner Hub Spacer |
|
|
|
| Transmission Rear Hub Slot | |
Pan Head Screw | Hub Support Plate Transmission Rear Hub |
| ||
|
| |||
| Wheelchairs Built AFTER 09/05/00 |
| ||
|
|
| Outer | Wheelchair |
|
|
| Hub | Side Frame |
Rear Wheel | Axle Washer | Spacer |
| |
|
| |||
Hub Spokes |
|
|
| |
|
|
|
| Hex Nut |
Rear Wheel |
|
|
| Transmission |
Bearing |
|
|
| |
|
|
|
| Assembly |
Axle Bolt
|
| Inner Hub Spacer |
|
| Transmission Rear Hub Slot |
Pan Head Screw | Hub Support Plate | Transmission Rear Hub |
|
|
FIGURE 4 - INSTALLING/REMOVING REAR WHEEL TO/FROM TRANSMISSION REAR HUB - INSTALLING/REMOVING THE HUB SUPPORT PLATES - INSTALLING/REMOVING THE AXLE BOLT
10