Invacare 6845-5, 6681-5 operating instructions Safety Summary, Assembling the Base Figure

Page 1

I.V. Stand

Assembly, Installation and Operating Instructions

Model No. 6681-5

Model No. 6845-5

Model No. 6845

 

 

 

 

 

 

SAVE THESE INSTRUCTIONS

NOTE: Check ALL parts for shipping damage. If ship- ping damage is noted, DO NOT use. Contact Carrier/ Dealer for further instructions.

SAFETY SUMMARY

The following recommendations are made for the safe use of the Invacare I.V. Stand:

ASSEMBLING THE BASE (FIGURE 1)

Models 6681-5 and 6845-5

1.Place base upside down.

2.Align a caster stem with a mounting hole in the base.

3.Firmly push down on bottom of caster until caster stem snaps into mounting hole.

NOTE: Pressure MUST be applied on the correct area or the caster will not insert properly.

GENERAL WARNINGS

DO NOT install this equipment without first reading and understanding this instruction sheet. If you are unable to understand these Warnings, Cautions and Instructions, con- tact a healthcare professional, dealer or technical personnel if applicable before at- tempting to install this equipment - other- wise, injury or damage may occur.

SPECIFIC WARNINGS

Always inspect the I.V. stand to ensure that it is properly positioned and is stable be- fore using.

After ANY adjustments, repair or service and BEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur.

NOTE: Model 6681-5 and 6845-5 I.V. stands are pack- aged in pairs. There are enough parts to construct two (2) complete I.V. stands.

Each package includes the following items:

DESCRIPTION

 

QUANTITY

 

 

6681-5

6845-5

6845

I.V.Hanger

2

2

1

UpperI.V.tube

2

2

1

Lower I.V. tube

2

2

1

Base

2

2

N/A

Upper Base Half

N/A

N/A

1

Lower Base Half

N/A

N/A

1

Caster

10

10

4

Bolt

2

2

1

Small Steel Washer

2

2

1

Locking Washer

2

2

N/A

Black Plastic Insert

2

2

N/A

Large Steel Washer

2

2

1

Adjusting Knob

2

2

1

Washer

N/A

N/A

4

Locknut

N/A

N/A

4

Wrench

N/A

N/A

1

 

 

 

 

4. Repeat STEPS 2-3 for remaining four (4) casters.

Model 6845

1.Position the upper base half and lower base half as shown in FIGURE 1.

NOTE: The lower base half has a recess in the center.

2.Install one (1) washer onto one (1) caster stem.

3.Insert caster stem UP through mounting hole in base.

4.Install locknut onto caster stem. Tighten securely us- ing wrench provided.

5.Repeat STEPS 2-4 for remaining three (3) casters.

MODELS 6681-5

 

 

AND 6845-5

 

Bottom of Caster

 

 

Caster

(APPLY PRESSURE

 

 

HERE)

 

 

Caster

 

 

Stem

 

 

Mounting

 

 

Hole

Base

 

 

MODEL 6845

 

Locknut

 

 

Lower

 

Mounting

 

Hole

Base Half

Washer

 

 

Recess

 

Caster

 

Stem

Upper

 

 

Caster

Base Half

 

FIGURE 1 - ASSEMBLING THE BASE

over

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Assembling the Base Figure Safety SummaryGeneral Warnings Specific WarningsModels 6681-5 Assembling the I.V. Stand FigureModel Models 6681-5

6681-5, 6845-5 specifications

Invacare is a prominent name in the healthcare industry, recognized for its innovative products that enhance patient care. Among its extensive range, the Invacare 6681-5 and 6845-5 are standout options designed specifically for patient mobility and comfort.

The Invacare 6681-5 is a highly adjustable wheelchair that caters to varying patient needs, ensuring optimal support and comfort. One of its main features includes an easy-to-adjust backrest and armrests, providing caregivers the ability to customize the seating position for individual patients. The wheelchair is constructed with high-strength aluminum, making it both lightweight and durable, which is essential for transportation and long-term use.

Another notable aspect of the Invacare 6681-5 is its user-friendly design. It features quick-release wheels that enable efficient disassembly for transport or storage, making it an ideal choice for users who frequently travel. The chair is equipped with non-marking tires, promoting safety while reducing wear on indoor surfaces.

In contrast, the Invacare 6845-5 aims to provide a blend of comfort and stability, making it suitable for patients with more complex mobility needs. This model features a specialized seat cushion designed to reduce pressure points, thereby enhancing patient comfort during prolonged usage. The cushion is made from high-quality foam that adapts to the user's body, ensuring weight distribution and preventing bedsores.

The 6845-5 also incorporates advanced technologies such as the customizable seating system, which allows for easy adjustments that accommodate various patient sizes and preferences. This ensures not only comfort but also the necessary support for those with specific medical requirements.

Both models reflect Invacare's commitment to quality and innovation in patient care. They are built with user-friendly features that promote independence and mobility, thereby improving the overall quality of life for users. Additionally, these wheelchairs come standard with adjustable footplates, reinforcing their suitability for users with differing leg lengths.

In summary, the Invacare 6681-5 and 6845-5 provide exceptional mobility solutions with a focus on comfort, support, and user customization. Their robust construction, advanced technologies, and practical features make them excellent choices for patients requiring a reliable mobility aid. Whether for day-to-day use or specific medical needs, these wheelchairs stand out as exemplary options in the healthcare market.
Top Page Image Contents