IVC™Heavy Duty Shower Chair
Assembly, Installation and Operating Instructions
Model Nos. 9781, 9780
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.
MODEL NO. | DESCRIPTION |
9781 | IVC Heavy Duty Shower Chair with Back (Composite) |
9780 | IVC Heavy Duty Shower Chair without Back (Composite) |
SAFETY SUMMARY
To ensure the safe and proper installation of the IVC Heavy Duty Shower Chair, these instructions MUST be followed:
WARNING
DO NOT install this equipment without first reading and understanding this instruction sheet. If you are unable to understand the warnings, cautions and instructions, contact a healthcare professional, dealer or technical personnel if applicable, before attempting to install this equipment - otherwise, injury or damage may occur.
All four (4) leg tips MUST be in contact with shower/tub floor at all times.
Always inspect the Shower Chair to ensure that it is properly positioned and stable before using. DO NOT use if Shower Chair is wobbly or unstable.
Check leg tips for rips, tears, cracks or wear. If any of these conditions exist, replace leg tips immediately.
This product should only be used with tub floors wider than
Users with limited physical capabilities should be supervised or assisted when using the Shower Chair.
Shower Chair is NOT to be used as a transfer bench, transfer device or climbing device.
These Shower Chairs (Models 9781 and 9780) have a weight limitation of 400 lbs (182 kg) each.
Exercise caution when assembling the chair to avoid pinching.
Invacare products are specifically designed and manufactured for use in con- junction with Invacare accessories. Accessories designed by other manufac- turers have not been tested by Invacare and are not recommended for use with Invacare products.
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Part No 1122173 | 1 | IVC™Heavy Duty Shower Chair |