Invacare Back Support manual INSTALLING/REMOVING Cushion Foam, Procedure Maintenance

Page 14
Upper Flap
Lower Flap
Fastening Strip
(Attach to Lateral
Support)
Tapered End of Cushion
Foam
Cushion
Cover
FIGURE 2 - REMOVING/INSTALLING LATERAL SUPPORT CUSHION FOAM
Opening
(Insert
Cushion
Foam)

PROCEDURE 5

MAINTENANCE

This Procedure includes the following:

MInstalling/Removing Cushion Foam

AInspection

I

NCleaning

TINSTALLING/REMOVING

ECUSHION FOAM

N

ANOTE: Refer to the INSTALLATION AND STABILITY

NWARNINGS in the SAFETY SUMMARY of this manual.

CInstalling/Removing Back Cushion Foam

E(FIGURE 1)

INSTALLING.

1.Remove the back cushion from the back panel(s). Refer to INSTALLING/REMOVING CUSHIONS in PROCEDURE 2 of this manual.

2.Position the back cushion on a flat surface.

3.Pull the top flap UP and the bottom flap DOWN.

4.Slide the top of the cushion foam inside the cushion cover.

5.Ensure the bottom and sides of the cushion foam are behind the elastic strips on either side of the cushion cover.

6.Install the cushion onto the Infinity Back. Refer to IN- STALLING/REMOVING CUSHIONS in PROCE- DURE 2 of this manual.

REMOVING.

1.Remove the back cushion from the back panel(s). Refer to INSTALLING/REMOVING CUSHIONS in PROCEDURE 2 of this manual.

2.Pull the top flap UP and the bottom flap DOWN.

3.Grasp the cushion foam and remove it from the back cover.

Top of

BackTop Flap

Cover

Top of Cushion

Installing/Removing Lateral Support Cushion Foam (FIGURE 2)

INSTALLING.

1.Remove the lateral support cushion from the lateral support. Refer to INSTALLING/REMOVING CUSH- IONS in PROCEDURE 2 of this manual.

2.Position the cushion cover on a flat surface with the pocket facing UP as shown in FIGURE 2.

3.Pull up and hold the upper flap.

4.Slide the larger end of the cushion foam into the open- ing in the cushion cover.

5.Pull down and hold the lower flap.

6.Insert the tapered end of the cushion foam into the cushion cover.

REMOVING.

1.Remove the lateral support cushion from the lateral support. Refer to INSTALLING/REMOVING CUSH- IONS in PROCEDURE 2 of this manual.

2.Position the cushion cover as shown in FIGURE 2.

3.Pull up and hold the upper flap on the pocket side of the cushion cover.

4.Pull down the lower flap.

5.Grasp the cushion foam and remove it from the cush-

ion cover.

Pocket (Insert

Lateral Support)

Elastic

Foam

Strip

Back

Cushion

Bottom

Foam

Flap

FIGURE 1 - REMOVING/INSTALLING

BACK CUSHION FOAM

14

Image 14
Contents Infinity Back Supports Special Notes Safety Summary Safety SummarySeating Pressure Warning INSTALLATION/ADJUSTMENT Overview Figure Important INFORMATION/INSTALLATION/ADJUSTMENT OverviewProcedure INSTALLING/REMOVING Cane Clamps FigureInstalling Inserts Figure Installing Cane ClampsPreparing the Infinity Back for Installation Procedure INSTALLING/REMOVING the Lateral Supports FigureINSTALLING/REMOVING Cushions Figure Installing/Removing Lateral Support Cushions Installing/Removing Back CushionLower Fixed Adjusting the Mounting Hardware HeightAdjusting the Mounting Hardware Width Cane ClampInstalling the Infinity Back Removing the Infinity BackAdjusting the Infinity Back Procedure Adjusting Cane Clamp Height FigureAdjusting the HINGE/ANGLE Dualflex only Adjusting the Angle FigureAdjusting the Infinity Back Adjusting the Depth Hardware FigureAdjusting the Lateral Supports Figure Adjusting the WidthAdjustingtheHeight DetailInstalling/Removing Back Cushion Foam INSTALLING/REMOVING Cushion FoamProcedure Maintenance Installing/Removing Lateral Support Cushion Foam FigureInspection CleaningMaintenance Procedure CoverLimited Warranty