PROCEDURE 2 | PREPARING THE INFINITY BACK FOR INSTALLATION |
PREMOVING.
R1. Remove the back cushion from the back panel(s).
ERefer to INSTALLING/REMOVING BACK CUSH-
PION in this procedure of the manual.
A
R2. Grasp the spinal insert(s) and pull to release the hook
Iand loop fasteners.
N3. Install the cushion onto the back panel(s). Refer to
GINSTALLING/REMOVING BACK CUSHION in this
Tprocedure of the manual.
H
EInstalling/Removing Lateral Support
Cushions
B
AINSTALLING.
C1. Hold the fastening end of the cushion away from the
Kfastening strip on the support.
2.Insert the support into the pocket on the opposite end of the cushion as shown in FIGURE 2.
3.Release the fastening end of the cushion.
4.Press the fastening end firmly against the support to secure.
REMOVING.
1.Grasp the fastening end of the cushion.
2.Pull upwards to release the hook and loop fasteners as shown in FIGURE 2.
3. Slide the cushion off the support.
Installing/Removing Back Cushion
INSTALLING.
1.Lift the top flap up and pull the bottom flap down on the back cushion cover.
2.Position the cushion against the back panel(s) with the flaps on the outside of the Infinity Back.
NOTE: Ensure the lateral supports are positioned between the back cushion foam and the elastic strips on either side of the back cushion cover as shown in FIGURE 2.
3.If desired, install the adjustable positioning pad (UniBack only) onto the back cushion foam. Refer to INSTALLING/REMOVING CUSHION FOAM in PROCEDURE 5 of this manual.
4.Close the top and bottom flaps of the back cushion cover andpressthefasteningstripstogethertosecuretheback cushion to the Infinity Back as shown in FIGURE 2.
REMOVING.
1.Grasp the top flap and pull up to release the fastening strips.
2.Grasp the bottom flap and pull down to release the fastening strips.
3.Grasp the cushion and pull away from the Infinity Back to remove.
| SPINAL INSERT | BACK CUSHION |
| ||
Rounded Groove |
| Infinity | |||
Rounded Edge |
| Lateral | |||
in Back Panel |
| ||||
| Top Flap | Support | Back | ||
|
| Spinal | |||
|
|
|
|
| |
|
| Inserts | Elastic |
|
|
|
|
|
|
| |
|
|
| Strip |
|
|
|
|
| Bottom |
|
|
|
|
| Flap |
|
|
| Fastening | Fastening Strips | Fastening | ||
| Strips | (Attach to Back Panel) | Strips |
| |
LATERAL | SUPPORT | Back Cushion |
| ||
|
|
| |||
NOTE: Lat- | END |
|
|
| |
|
|
|
| ||
eral support |
|
|
|
| |
| Support |
| Top |
| |
not installed |
|
|
| ||
|
|
| Flap |
| |
for clarity. |
|
|
|
| |
|
|
|
|
| |
Lateral Pad |
|
|
|
|
|
Hook and Loop | FASTENING |
| Bottom |
| |
END |
| Flap |
| ||
Fastening Strips |
|
|
|
| |
FIGURE 2 - INSTALLING/REMOVING CUSHIONS
8