Invacare KSS Using Clamps, Fixed Release Clamps For Seat Figure, Twist Release Figure

Fixed Release Clamps For Seat (FIGURE 14)

NOTE: Refer to INSTALLATION WARNING in the SAFETY SUMMARY before proceeding.

NOTE: The quick release and fixed release clamps are designed to fit either 1-inch rail tubing or, with insert pro- vided, 7/8-inch rail tubing.

1.Remove the sleeve, lock washer, and internal threaded mounting screw from the fixed release clamp (DETAIL “C”) .

2.Place the fixed release clamp on the seat rail.

3.If fixed release clamp is not tightly fitted around seat rail tubing, install insert provided as shown in DETAIL “C” .

4.Install the fixed release clamp onto the back rail so that the fixed portion is flush against and rests on top of the mounting hook and is located between the seat rail and the bottom of the mounting hook.

5.Reinstall the sleeve, lock washer, and internal mount- ing screw into the fixed release clamp and torque to 75 - inch pounds.

6.Repeat STEPS 1-5for other side.

7.Once fixed release mounting clamps are secured, do one (1) of following:

A.Refer to QUICK RELEASE CLAMPS FOR SEAT in PROCEDURE 2 of this instruction sheet.

B.Refer to USING CLAMPS inthisinstructionsheet.

DETAIL “C”

Insert Internal Mounting Screw

Lock Washer

Sleeve
Back Cane
		Fixed
Fixed
	Mounting	Portion Release
Portion
	Hooks		Portion

Fixed Release	Quick Release
Clamp	Clamp

NOTE: For TRANSPORT READY OPTION (TRRO) use ONLY Quick Release Clamps on Seat Rails.

FIGURE 14 - QUICK RELEASE AND FIXED

RELEASE CLAMPS FOR SEAT

USING CLAMPS

Twist Release (FIGURE 15)

1.To unlock the cane clamp, twist away from the back cane.

2.To lock the cane clamp, twist in toward the back.

TOP VIEW

Twist Release

Cane Clamp

Unlock Back

Mounting

Hook

Back Cane

NOTE: For TRANSPORT READY OPTION (TRRO) Twist Release Cane Clamp is REVERSED.

FIGURE 15 - USING CLAMPS - TWIST RELEASE

Quick Release (FIGURE 16)

1.To unlock, push down on the release tab of the quick release rail clamps.

2.To lock, push down on the thumb-like feature of the quick release rail clamps.

TO LOCK APPLY

PRESSURE HERE

TO UNLOCK APPLY

PRESSURE HERE

Wheelchair

FrameMounting

Quick Release Hook

Rail Clamp

FIGURE 16 - USING CLAMPS - QUICK RELEASE

12