Invacare 1036794, 1094952, 1094953, 1036793 Detail a TOP Views, Description QTY

REAR ARMREST SOCKET INSTALLATION ON WHEELCHAIRS BUILT BEFORE 7/00

Space Saver Armrest Sockets (FIGURE 2)

Space Saver Kit No. 1036793 Includes the following:

DESCRIPTION	QTY.
Left Outside Armrest Bracket	1
Left Inside Armrest Bracket	1
Left Armrest Spacer	1
Right Outside Armrest Bracket	1
Right Inside Armrest Bracket	1
Right Armrest Spacer	1
Front Armrest Socket	2
Rear Armrest Socket	2
TubeSupports	2
Hex Screw	8
Locknuts	8

1. Insert the tube support into armrest socket.

3.Position the armrest spacer flush against the inside of the outside armrest bracket as shown in “DETAIL A”, FIGURE 2.

4.Place the armrest socket into the groove of the arm- rest spacer.

5.Position inside armrest bracket against the armrest socket (FIGURE 2).

6.Loosely secure the brackets, armrest socket and arm- rest spacer together using one (1) of the six (6) hex screws and a locknut.

7.Position the armrest bracket on the rear frame making sure that the armrest spacer is positioned on the outside ofthereararmrestsocket.RefertoDetail“A”inFIGURE 2.

8.Secure the assembly of the chair frame using two (2) of the six (6) hex screws and locknuts.

CAUTION

Make sure that all screws and locknuts are secure at all times.

NOTE: Tube support MUST be positioned below mount-	9. Repeatthisprocedurefortheoppositesideofthechair
	frame.
ing hole.

2.Position the outside armrest bracket towards the out- side of the chair frame.

Outside	Inside
Armrest Bracket	Armrest Bracket
	Left Inside
	Armrest Bracket
Left Chair Frame	Locknuts

Right Outside

Armrest Bracket Hex Screw

Right Chair

Frame

Locknuts

Tube Support

Armrest

Spacer

Right Inside

Armrest BracketRear Armrest

Socket

DETAIL “A”

TOP VIEWS

Left Outside			Left	Right
Armrest Bracket		Tube		INSIDE
		Support	OUTSIDE	OUTSIDE
		Mounting
		Hole
Hex Screws	Armrest	Rear Armrest
		Socket

Spacer

Armrest Spacers

FIGURE 2 - REAR ARMREST SOCKET INSTALLATION - SPACE SAVER ARMS

2