Hardware Features
✓FOUR FORM “C” (N.O. & N.C) RELAYS
Each relay has
✓FOUR
Activates access device for exiting using a hardwired switch
✓FOUR SENSING INPUTS
For sensing door position to control
✓NINE STATUS INDICATORS
Display access, reader, and system information
✓OPTIONAL MODEM
Compatible with the Model
✓
✓NETWORK SUPPORT
Multiple units can be connected together to share data
✓EXPANSION INTERFACE SUPPORT
Model
✓
Stamps the event log data as it is stored in the system’s memory
✓WIEGAND INPUTS
Two Wiegand format card reader inputs for connection to external devices
✓LINEAR PBUS SUPPORT
Two PBUS input/output ports for connection to Linear accessories
✓BACKUP BATTERY SUPPORT
✓POWER FAILURE MONITOR
AC power input is monitored, power outages are recorded in the event log
Software Highlights
✓COMPUTER PROGRAMMABLE
No dedicated programmer required, program with a computer and a modem
✓LARGE ENTRY CODE CAPACITY
Up to 20,000 entry codes can be used for gaining access
✓
Flexible code length for different applications
✓LARGE TRANSMITTER CAPACITY
Up to 45,600 block coded and 20,000 individually enrolled
Linear transmitters can be used for gaining access
✓TRANSMITTER FACILITY CODE SUPPORT Identifies wireless transmitters by installation
✓LARGE CARD CAPACITY
Up to 45,600 block coded and 20,000 individu- ally enrolled cards can be used for gaining access
✓FOUR INDEPENDENT RELAY CHANNELS Each output’s action is programmable
✓PROGRAMMABLE TIME SCHEDULED RELAY ACTIVATION
Activation for up to four time periods for each of the 31 system time zones
✓PROGRAMMABLE TIME ZONE ACCESS VALIDATION
Validation during four time periods for each of the 31 system time zones
✓PROGRAMMABLE VALIDATION DAYS Select days of the week access is allowed
✓PROGRAMMABLE HOLIDAY DAYS
Select up to 24 expiring & 24
✓OBSTACLE TRANSMITTER SUPPORT Compatible with Linear’s Model MGT transmitter
✓EVENT LOG
Stores up to 20,000 system events in memory for record keeping
✓DELETED CARDHOLDER DATABASE
System logs deleted cardholders for future identification
✓TIMED OR TRUE ANTI-PASSBACK
Options to temporarily disable a cardholder’s credentials after access for a preset time or depending on the cardholder’s access direction
Feature Overview
Relay Outputs
Four
Request-to-Exit Inputs
Each relay channel has a
Sensing Inputs
The sensing inputs connect to door switches that monitor whether the controlled door is open or closed. The sensing inputs may alternately be programmed as “access inhibit” inputs for use with an external timer or service switch.
Optional Modem
A modular connector is provided for telephone line connection to the unit’s optional 33.6K baud modem. The system can be accessed remotely for programming and control over the standard telephone system using a personal computer with a modem. For system backup, a computer connected through the modem can store and retrieve the AM3Plus memory data.
RS-232 Communications Port
A modular connector is provided for the
Obstacle Detection
Linear’s Model MGT safety edge transmitter is compatible with the AM3Plus. The MGT detects and transmits obstacle events to a remote receiver connected to the AM3Plus.
Programming Memory
The AM3Plus fl ash memory retains all entry codes, transmitter information, card access, and programming, even without power.
Battery Backup
The system supports a
Network Support
Multiple AE1000Plus, AE2000Plus, & AM3Plus units can be networked together via
Linear PBUS Ports
Two
3