IX Troubleshooting
Serial number locations
Several components of your power wheelchair have been assigned serial numbers at the factory. There may be times when you will need to provide a serial number; for example, if you order replacement parts. The following diagrams are provided to help you find the serial number labels.
label
Base frame
The base frame serial number label is located at the caster end of the base frame, as shown at right (front of the base frame for rear wheel drive; back of the base frame for front wheel drive).
base frame
Cowl
The cowl serial number label is located on the under- side of the cowl, as shown at right.
cowl
Seat frame
The seat frame serial number label is located at the back of the seat frame, as shown at right.
Hand control
The hand control serial number label is located on the underside of the hand control, as shown at right. You must remove the hand control from its mounting bracket to see this serial number label. Please note that the hand control has an additional serial number label on the side, which is not intended to be permanent; you may remove it.
label
label
seat frame
hand control
label
38 | GF0600050RevE06, August 2006 | Everest with Captain Seat Owner's Manual |