Unpacking & Assembly

Warning: H ave two people take care of the seat disassembly and transportation. Unpack your

power wheelchair where it will be used. Be careful not to damage anything during the unpacking process. Place your power wheelchair on a level flat surface. It is recommended that you place a protective covering on your floor.

1-1. Take out the left/ right armrests assemblies from carton and insert them into the adapters on the back of seat frame as shown in the following picture. Tighten them by the knobs.

2-1. Insert the joystick brace into the armrest adaptor and tighten up with knob. Use 3 pieces of the cable ties to fix the joystick cable to the armrest tube.