Drive Medical Design 2850-18, 2850-20 manual Unpacking & Assem BLY

UNPACKING & ASSEM BLY

Warning: Have two people install the seat assembly.

3-1. Plug in the joystick cable with the control module which is located under the seat frame.

4-1. Take the seat frame out from carton. Put the seat frame onto the power base. (Fig.12-1) 4-2. Push the seat backward and make sure the pin locks with the

fixing bracket on booth sides. (Fig.12-2)

(Fig.12-1) (Fig.12-2)

12