Golden Technologies GP600 SS, GP601 SS, GP600 CC, GP601 CC owner manual Joystick Installation

ASSEMBLY

JOYSTICK INSTALLATION

1.Position the joystick on the joystick bracket. Match the holes in the joystick with the holes in the bracket. See figure 1.

2.Insert the 4 Allen-head screws with lock washers through the bracket and into the holes in the joystick.

3.Use an Allen wrench to tighten the screws.

4.Connect the joystick cable to the controller cable. See figure 2.

5.Use the provided Velcro→ tie-wraps and under arm clip to secure the controller cable to the armrest bracket.

Allen-head screws

Joystick Bracket

Figure 1

Joystick Cable

Figure 2

11