Compass Owner’s Manual – Models # : GP600 SS, GP600 CC, GP601 SS, GP601 CC | Revised 11/30/06 |
OPERATION/DIAGNOSTICS
Flash codes indicate the nature of an abnormal condition directly from the SHARK Information Gauge. Without the use of any servicing tools, the condition can be simply diagnosed.
Flash | Description |
|
Code |
|
|
|
|
|
1 | User Fault | Possible stall timeout or user error. Release |
|
| the joystick to neutral and try again. |
2 | Battery Fault | Check the batteries and cabling. Try charging |
|
| the batteries. Batteries may require replacing. |
|
|
|
3 | Right Motor Fault | Check the right motor, connections and |
|
| cabling. |
4 | Left motor fault | Check the left motor, connections and |
|
| cabling. |
5 | Right park brake fault | Check the right park brake, connections and |
|
| cabling. |
6 | Left park brake fault | Check the left park brake, connections and |
|
| cabling. |
7 | SHARK Control Unit Fault | Check the SHARK Communications Bus con- |
|
| nections and wiring. Replace the Control Unit |
|
|
|
8 | SHARK Power Module | Check SHARK connections and wiring. |
| Fault | Replace the Power Module. |
9 | SHARK Communications | Check SHARK connections and wiring. |
| Fault | Replace the SHARK Control Unit. |
10 | Unknown Fault | Check all connections and wiring. Consult a |
|
| service agent. |
The SHARK modules are not user serviceable. Do not attempt to repair Shark modules.
Note that joystick OONAPU (Out Of Neutral At Power Up) is not a fault. Simply by removing your hand from the joystick and allowing it to return to the neutral position, the fault will immediately clear. If the condition persists after removing your hand, the joystick may be damaged. Consult a Service agent.
24