Note: User should ensure proper mode is selected before attempting to drive or operate actuator.
Locking the SHARK
Some SHARKS may be supplied factory programmed with a LOCK feature that prevents unauthorised people from turning SHARK on.
To LOCK Shark
•While the power is ON, press and hold the POWER button for 2 seconds
•The display will turn off immediately
•After 2 seconds all LED’s will flash briefly and the horn will sound a short beep.
•The powerchair will then turn off.
To UNLOCK Shark
•While SHARK is locked, press the power button to turn shark ON.
•All LED’s will flash briefly. The LED’s will then perform a slow right to left countdown.
•Press the HORN button twice before the countdown is completed (approx 10 seconds)
•The current state of charge will be displayed and SHARK may be operated normally.