Quick Installation Guide
Hardware Installation
Figure 2. Top Panel
1.Select the Site – Choose a proper place for your WA5001 Wireless Access Point. In general, the best location is at the center of your wireless coverage area, within line of sight of all wireless devices.
2.Placement of the Wireless Access Point – Proper placement will improve performance. Try to place the access point in a position that can best cover its BSS (page 25). Normally, the higher you place the antenna, the better the performance.
Reset
Button
| 45 |
| 3.3 V DC |
|
| ||
| |||
RJ- |
| ||
Connector | Power Socket | ||
Figure 3. Rear Panel
3.Connect the Ethernet Cable – The WA5001 can be wired to a 10/100 Mbps Ethernet through a network device such as a hub or a switch. Connect to the
4