Advanced Setup
How to Set up the Access Control List:
1.Select ACL Enable
2.Enter an ACL ID (1 ~ 60)
3.Enter the MAC address of the station you want to set up.
4.Enter a Key Map, one of the shared keys (1 ~ 4) or one of the unique keys (5 ~ 64), and choose Allow or Deny. If the station’s WEP key is the same as the Key Map you assigned, the station will then allow or deny connections to the access point.
5.If you just enable the ACL, all stations that have shared keys can also connect to the access point. If you set the ACL to Strict, only stations with MAC addresses in the ACL can connect to the access point.
SNMP
Use this screen to display and enter a community string for the Simple Network Management Protocol (SNMP). To communicate with the access point, the SNMP agent must first be enabled, and the Network Management Station must submit a valid community string for authentication.
19