Accton Technology WA-5001 manual Performance

Advanced Setup

Turbo Mode: You may either Enable or Disable the Turbo Mode. (Default: Disable)

Turbo Mode is the enhanced wireless LAN operating mode (not regulated in the standard IEEE 802.11a) that can provide a higher data rate. The Normal Mode of the 802.11a access point provides connections up to 54 Mbps. Enabling Turbo Mode on the 802.11a access point allows the access point to provide connections with a data rate of up to

72 Mbps.

Note: In Normal Mode, the channel bandwidth is 20 MHz. In Turbo Mode, the channel bandwidth is increased to 40 MHz. However, there are only three channels available when the Turbo Mode is enabled (only 1 channel in Japan).

Performance

Data Rate: Select “best” from the drop-down list to optimize the data transfer speed for

your network. (Default: best)

Transmit Power: Set the signal strength transmitted from the access point. The longer

the transmission distance, the higher the transmission power required. (Default: full)

13