Preparation |
GB GB |
Loading the batteries
GB
GB
1 | Installing the Scale Platform |
Use this equipment on a hard flat surface. |
If using the unit on soft carpets, attach the carpet feet.
With the carpet feet you can
perform measurement even on | Support |
carpets up to 20 mm thick. | (Attached) |
| |
Support | Correct way |
Hole | to attach foot |
Caution
Do not use carpet feet except on carpets.
This could make the product unstable.
Wrong way to attach foot
Locate the battery compartment behind the display box. open the battery box cover.
put in the AA R6P dry U cell batteries. (Included)
When you put dry cell batteries in for the first time after purchasing the equipment, the product will ask you to check the calender.
The life of the dry cell batteries is about 1 year if the product is used once a day. The life of the batteries
included may be shorter than stated above.
Do not damage the connection parts or connection cable.
If you use force to bend, pull, twist or step on them, this may cause failure or malfunction.
Changing the Dry Cell Batteries | Use | ||||
Even if the batteries are removed, memorised personal data (birthdays, gender, heights and measurement figures) | |||||
| |||||
will not be deleted. |
| ||||
|
| ||||
When changing dry cell batteries or operating the equipment, if the LCD behaves oddly or the switch does not work, |
|
| |||
please remove the batteries, wait until the LCD clears (for about five minutes) and put the batteries back in again. |
|
| |||
|
|
|
|
| |
If the dry cell batteries are exhausted, |
| starts to flash on the display. (You cannot operate the equipment or perform |
| ||
Lo |
| ||||
Do not carry the equipment by holding it only by the connection cable.
This may cause failure, breakage or malfunction, and there is a risk of damage if you drop the equipment.
2 Connect the Display Box to the Scale
measurement.) |
Display |
Please change all four batteries immediately to ensure continued accuracy.
* While Lo is flashing, even if you remove the dry cell batteries, the set date and time are maintained (for about five minutes.)
Please change the dry cell batteries as quickly as possible.
*Never use alkaline dry cell batteries together with manganese dry cell batteries, as this may cause malfunction.
Platform
After changing the dry cell batteries, the following displays appear. Please follow each instruction and operate the equipment accordingly.
Be sure to hold the plug at the end of the connection cable and insert it into the display box. (Insert it straight into the box so that the triangle signs on both sides meet.)
Caution
Be sure to insert and pull out the connection cable by
• | When | Lo | flashes for |
a few seconds and then | |||
| disappears. |
| |
• | When nothing is displayed. |
Press the Time/DOWN and check the date and time in the calendar.
•If the date or time is wrong, please correct it. (See How to change the calendar on page 21.)
•When | is displayed, please set the calendar. | |
|
| |
|
| |
|
|
(See Calendar Setting on page 10.)
holding the plug at the end of the connection cable.
Otherwise this may damage the product.
8
• | When | is displayed. | Please set the calendar. (See the Calendar Setting on page 10.) |
9