How to Measure (For
GB
GB
Have you memorised your personal details?
GB GB
Remarks
Measure barefoot with clean, dry feet.
Stand up with your knees straight.
Ensure the insides of your thighs are not touching. Place your heels correctly on the electrodes.
1Press your “Personal” Memory Key.
(A short beep will sound.)
2 | Start measurement. |
After 0.0 kg is displayed, | |
be sure to stand on the | |
| weighing platform barefoot |
| so that your heels touch the |
| center of the electrodes. |
Measurement is finished.
“Body weight” and the “Body fat percentage” will be displayed for about
3 seconds.
(Two short beeps will sound.)
Points to Note
If the display box and the scale platform are not firmly connected.
e"ERROR" will be displayed and you cannot measure yourself.
If the soles of your feet are not clean or you are not standing on the scale platform correctly,
measure yourself.
If the body fat percentage exceeds the range of measurement,
e
If you step on the scale platform before 0.0 kg is displayed,
eDisplays such as ERROR ,
First, the calendar is displayed.
Next, your date of birth, height, gender and the “Personal” Memory Key are displayed.
When your data is
memorised with “3”.
Step on the scale platform berefoot.
Your body weight will be displayed.
(A short beep will sound.)
The measurement will be automatically recorded.
*If “NOT RECORDED” is displayed, please measure yourself again within one minute. (For details, please refer to page 18.)
The BMI figure is displayed.
Note: When measured in the
Use
appear or the power will be switched off during measurement.
Then “ooooo” will appear in succession.
Until the “Body fat
Graphs are displayed and
percentage” is displayed on
the digital display, move as
then the unit will switch
little as possible and stand
off.
The display changes to 0.0 kg.
straight. |
Display
Personal
Memory key
(for five individuals)
Front electrode
Heel electrode
14
Automatic Power Off Function
In order to save power, the power will be automatically switched off after use. (The display disappears.) This function also works in the following cases.
When the button operations are stopped.
Although it depends on the operation concerned, the power will be switched off after about 20 to 30 seconds
When about 30 seconds have passed without you stepping on the scale platform after “0.0” kg is displayed.
When you stepped off the scale platform during the measurement.
When about 30 seconds have passed since the graph was displayed.
The measurement range of the body fat percentage is between 1.0% and 75.0%.
If the details are not stored in the memory...
ePlease refer to “Guest Mode:Measuring without pre- set data” on page 20.
15