Inserting/Replacing the batteries
The battery boxes are located on the back of the measuring platform. 1. Two
Lithium batteries can typically be used for many years before replacement is necessary. When the low battery sign, “LO” appears on the LCD, please replace with two new lithium batteries.
Gently remove the smaller battery cover. Press the edge of the battery to lift and remove the old batteries. Place new batteries positive (+) side up being sure that they are placed under the outer edge, as shown. Replace battery box cover. Please program the calendar and time.
2. One 9-volt replaceable Alkaline battery
The blue backlight of the LCD display is operated by one
Gently remove the larger battery cover and pull the old battery back from the connections to remove it. Place new battery in same position being sure that the positive (+) and negative
Weight Mode Switch
Select your preferred weight mode using the weight mode switch located on the rear of the scale.
Positioning the unit
KG LB |
Place the measuring platform on a hard, flat surface where there is minimal vibration to ensure safe and accurate measurement.
NOTE: To avoid possible injury, do not step on the edge of the platform.
Handling tips
•Do not attempt to disassemble the unit.
•Store the unit horizontally, and place it so that the buttons will not be pressed accidentally.
•Avoid excessive impact or vibration to the unit.
•Place the unit in an area free from direct sunlight, heating equipment, high humidity, or extreme temperature change.
•Never submerge the scale in water or spill chemical liquids on it. To clean, use a dampened cloth and mild detergent.
•Do not drop any objects onto the platform.
4