9.Frequently Asked Questions
Do I have to use distilled water with my device?
The use of distilled water will maximize the life of the water chamber. Water from the faucet will often contain minerals which can damage the chamber, causing pitting in the base, even if the water is passed through a filter.
Can I use my device in other countries?
Yes. Simply use the appropriate electrical socket adaptor and the device will automatically adapt to any voltage supply.
Note: When moving your device, ensure that the water chamber is empty. Machine failure due to water damage is not covered by warranty.
Can I use supplemental oxygen with my device?
Yes, oxygen can be administered at the mask. Turn the device on before turning on the oxygen. Ensure that the oxygen source is turned off before turning off the device to avoid oxygen accumulating in the machine.
When do I replace my water chamber?
Replace the chamber if the plastic walls of the chamber become cracked or cloudy or the chamber base becomes pitted. (Note: If the chamber leaks at all, it should be replaced immediately).
Can I use my device without a heated breathing tube?
Yes you can, but you will not gain the optimum humidity performance the device offers.
The device will then not display the heated breathing tube symbol and show the following display:
10.Product Specifications
DIMENSIONS: | 273 mm x 170 mm x 175 mm |
| (10.7” x 6.7” x 6.9”) |
WEIGHT: | 2.1 kg (4.6 lbs) unit only |
| 3.4 kg (7.5 lbs) packaged in |
| bag incl. accessories |
ELECTRICAL RATINGS |
|
Supply Frequency: | |
Supply Voltage and Current: | |
| |
| Note:These values represent |
| average current. |
DC to AC Inverter | 115 V - 200 W/300 W surge |
requirements: | |
| 230 V – 300 W/500 W surge |
Heater Plate: | max. 85 W |
Heater Plate Temperature: | max. 65 °C (149 °F) |
Heated breathing tube | max. 30 W |
Power Setting: | |
PERFORMANCE |
|
Pressure Range: | 4 to 20 cmH2O |
Altitude Range: | 0 to 3000 m, or 0 to 9000 ft |
30 min | |
Humidity delivered: | 30 mg/l* |
*measured at 22 ºC ambient temperature: 10 cmH2O at bias flow.
STANDARDS COMPLIANCE:
Designed to conform to the
requirements of: IEC
CSA C22.2/No. 601.1 AS3200.1.0
The device complies with the electromagnetic compatibility requirements of IEC
11.Operating Conditions
AMBIENT TEMPERATURE: | 5 - 35 ºC |
HUMIDITY: | 10 - 95% RH |
ALTITUDE: | 0 - 3000 m (9000 ft) |
Above 1500 m (4500 ft) the maximum operating pressure will be reduced.
12.Storage And Transport Conditions
The device should be stored and transported in environmental conditions of: 14 to 140 °F
13.Troubleshooting
If you feel that your device is not operating correctly, consult your homecare dealer. Do not attempt to repair the device yourself.
Fisher & Paykel Healthcare have a policy of continued product improvement and
reserve the right to alter specifications without notice.
A - 8