Swift FX Bella Gray
Fitting
The Swift FX Bella Gray fitting illustrations in this user guide show the sequence for obtaining the best fit and comfort when using your mask.
Fitting steps
1.Hold the pillows at your nose ensuring that the ResMed logo is on the top of the pillows facing up. Pull one strap around and behind your ear.
2.Ensure the strap lies flat and is not twisted.
3.Repeat steps 1 and 2 with the other strap.
4.Adjust the mask fit by pulling the upper straps along the notches until a comfortable fit is achieved. Repeat with the lower straps. Do not overtighten.
5.Check that the nasal pillows are positioned upright in the entrance of your nostrils.
6.Finally, connect the free end of the short tube assembly to the device air tubing. The mask is now fitted and ready for use.
WARNING
Using Swift FX Bella Gray may cause ear soreness. If symptoms occur, consult your physician.
Removing your mask
To remove your mask, place your fingers underneath the straps and lift them away from your ears.
Disassembly
Refer to the Swift FX Bella Gray disassembly illustrations in this user guide.