ResMed 60561 manual Disassembling your Swift LT, Cleaning your Swift LT in the home

Page 5

Disassembling your Swift LT

1

Detach air tubing from short tube.

3

Remove pillows from frame.

2

Remove headgear from frame.

4

Remove elbow from frame.

Cleaning your Swift LT in the home

Notes:

•The nasal pillows system and headgear should be cleaned by handwashing.

•The headgear may be washed without being disassembled.

WARNING

Do not use aromatic-based solutions or scented oils (eg, eucalyptus or essential oils), bleach, alcohol or products that smell strongly (eg, citrus) to clean any of the system’s components. Residual vapours from these solutions can be inhaled if not rinsed thoroughly. They may also damage the system, causing cracks.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Swift LT Intended Use Using the Swift LTParts of the Swift LT & Ordering Information Fitting your Swift LT Using Tube Retainer OptionalDisassembling your Swift LT Cleaning your Swift LT in the homeDisposal Reprocessing your Swift LT between PatientsStorage Reassembling the headgear Reassembling your Swift LTBefore using your Swift LT TroubleshootingSound Technical specificationsConsumer Warranty SymbolsManufacturer Distributed by EUR1-ENG
Top Page Image Contents