ResMed 60561 manual Fitting your Swift LT, Using Tube Retainer Optional

Page 4

Fitting your Swift LT

B

1 A

2

3

English

(A) Hold the pillows at	Adjust top straps (over-
your nose; (B) pull the	tightening may cause
headgear over your head.	excess pressure on your
	nose).

4	5
Rotate frame to adjust	Connect the short tube
pillow angle to ensure it	to the ﬂow generator’s air
sits comfortably.	tubing.

Using Tube Retainer (Optional)

Adjust each end of the backstrap (overtightening may cause excess pressure on upper lip).

6

The Swift LT is now ﬁtted and ready for use. Head- gear should sit midway between ear and eye.

1

Push tube retainer into buckle. Clip either short tube or air tubing to tube retainer.

2	3
When using the tube	If the mask pulls on your
retainer, the tubing can be	nose, increase length of
positioned to either side of	tube between mask and
your face or centred.	tube retainer.

3

Image 4

Contents Swift LT Using the Swift LT Intended UseParts of the Swift LT & Ordering Information Using Tube Retainer Optional Fitting your Swift LTCleaning your Swift LT in the home Disassembling your Swift LTStorage Reprocessing your Swift LT between PatientsDisposal Reassembling your Swift LT Reassembling the headgearTroubleshooting Before using your Swift LTTechnical speciﬁcations SoundSymbols Consumer WarrantyManufacturer Distributed by EUR1-ENG