IBM S09N-8590-00 manual Hibernation Function

ŸTimer conditions are satisfied in suspend mode when

hibernate by timer is enabled.

Ÿ A critically low battery condition occurs.

ŸThe power switch is pressed. (BIOS Setup)

The	computer exits			hibernation		mode	and resumes		opera-
tion	when	the	power-on switch is pressed.					When	power	is
turned on,		the	hibernation		file	in	the boot record on the
hard	disk	drive is read and the					system	status	is	restored
from	the	hard	disk	drive.
The	power	switch must be pressed to cause the computer
to resume		operation		from	hibernation		mode.

How	to	Create	the	Hibernation Function:	Do as
follows:
Ÿ	Turn	off	the	computer.

ŸInsert the hibernation utility diskette into the diskette drive (you can create the diskette using the Diskette Factory).

Ÿ Turn on the computer.

ŸFollow the instructions on the screen.

Note: If you change the memory size, you need to recreate the hibernation file or partition. For partition-based hibernation, use the hibernation

utility to delete the partition first before creating a new one.

ThinkPad 24015