NOTES:
1.Each chain must be capable of supporting the entire weight of the machine.
2.Minimum chain length:
28 ft3 tank Ð 10
52 ft3 tank Ð 15
3.Total weight equals empty weight from chart and charge weight given on label.
STORAGE | CENTER OF GRAVITY | EMPTY WEIGHT | ||
APPROX. DIM. Ð | ||||
TANK SIZE | LB (Kg) | |||
A | B | |||
|
| |||
3 | 4- 51¤4 | 2380 | ||
28 Ft | (1353) | (505) | (1080) | |
| ||||
52 Ft3 | 3460 | |||
| (2086) | (527) | (1569) | |
Fig. 4 Ð Rigging Guide
Table 2 Ð Physical Data
19EA Pumpout Unit
|
| ENGLISH | (SI) | |
Pumpout Unit Weight* | lb (kg) | 210 | (95) | |
Pumpout Condenser Water Flow Rate | gpm (L/s) | 5 to 7 | (.32 to .44) | |
Pumpout Condenser Water Pressure Drop | psig (kPa) | 6 to 10.7 | (41.4 to 73.8) | |
Maximum Entering Condenser Water Temperature | F (C) | 85 | (29) | |
Maximum Leaving Condenser Water Temperature | F (C) | 100 | (37) | |
Condenser Relief Valve (Fusible Plug) | psig (kPa) | 385 | (2655) | |
Condenser Pressure Rating |
|
|
| |
Refrigerant Side | psig (kPa) | 385 | (2655) | |
Waterside | psig (kPa) | 150 | (1034) | |
Compressor Rating 1750 rpm (29 r/s) Reciprocating | cfm (L/s) | 8.7 | (.25) | |
Valves | in. OD | 1¤2 | 1¤2 | |
Brass Turn Knob Valves) | ||||
|
|
|
*The pumpout unit weight includes the compressor/condenser, control box, and the oil separator.
NOTES:
1.The motor is hermetic with thermal protection.
2.The control box is mounted and wired with a fuse on/off switch according to NEMA 1 (National Electrical Manufacturing Association).
3.The starter contactor is located in the control box. The overloads on the motor are wired and the disconnect switch is supplied by the customer.
4.The condenser tube is copper.
6